Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: CVPPC & PIV at the same time, possible?  (Read 1507 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline DragsterTopic starter

  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 1003
  • Country: mx
  • Gender: Male
    • Show only replies by Dragster
CVPPC & PIV at the same time, possible?
« on: March 26, 2004, 01:11:22 AM »
Hi!! I'd like to know if it's possible to use a CyberVisionPPC and a PIV graphics board on the same machine at the same time.. being that one of them is connected to the CSPPC local bus and the other one is Zorro... could it only be a software problem? (Assuming P96 and CGFX can not live together)...

Suggestions, experiences please :-)

Cheers

Dragster
Logged
Amiga 1200T 603/240, 060/50, SCSI II, Plextor 40/12/40S SCSI CDRW, Plextor 40X SCSI CDROM, Fujitsu 36GB 10KRPM SCSI HD, Pioneer 305S SCSI DVD, BVisionPPC, 256 MB FASTRAM, PowerFlyer EIDE, Scandex external scandoubler, ZIV busboard, Algor USB, Wireless, repulse audio...Peg II Quadruple boot: OS4.1FE/MorphOS 3.9 regged, OpenSUSE11.1 & Debian Squeeze, Powerbook G4 1139 MorphOS3.9, A4000D CSPPC/PIV/DENEB OS3.9/4.1FE, A4000T CSPPC/CVPPC/SCSI, etc.. 2
 

Offline JKD

  • Sr. Member
  • ****
  • Join Date: Aug 2002
  • Posts: 287
    • Show only replies by JKD
Re: CVPPC & PIV at the same time, possible?
« Reply #1 on: March 26, 2004, 02:25:58 AM »
There is a rather excellent PicassoIV driver for GybergraphX...yes, easily possible. I think the driver does not support all functions of the PIV - for example I had a Paloma TV in module, non of the TV stuff worked under CGX but I suspect I was in a minority with this hardware :-)

As far as I know P96 does not support CVPPC.

Steve
Logged
 

Offline Crumb

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1786
  • Country: 00
    • Show only replies by Crumb
    • http://cuaz.sourceforge.net
Re: CVPPC & PIV at the same time, possible?
« Reply #2 on: March 26, 2004, 09:03:56 AM »
OS4 will support Permedia2 so you'll be able to use both cards
Logged
The only spanish amiga news web page/club: Club de Usuarios de Amiga de Zaragoza (CUAZ)
 

Online zipper

Re: CVPPC & PIV at the same time, possible?
« Reply #3 on: March 26, 2004, 10:06:34 AM »
I was using even CV3D with those two, what a mess with the different screenmodes...
The biggest problem was stupid programs that opened the first RTG screen they could find -  I think alphabetically as CV3D was then used and PIV or CVPPC were much preferred by me.
So I finally took CV3D off and stayed with those two until I got Prometheus/Voodoo3. Then I had 3 again but only 2 usable at the same time because of the sw support. I still have alternate boot partitions with P96 and CGX4 respective.
Logged
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show only replies by Framiga
Re: CVPPC & PIV at the same time, possible?
« Reply #4 on: March 26, 2004, 12:27:21 PM »
Hi zipper,
Quote
The biggest problem was stupid programs that opened the first RTG screen they could find - I think alphabetically as CV3D was then used and PIV or CVPPC were much preferred by me.

have you tryed to install NewMode?

With NewMode, you can choose the screen-card mode you wish.

Ciao

Logged
 

Online zipper

Re: CVPPC & PIV at the same time, possible?
« Reply #5 on: March 26, 2004, 07:28:28 PM »
I have used ModePro for years but by default I don't use it anymore as
some programs don't like it -  WHDLoad pops to my mind first.
Logged
 
Pages: [1]   Go Up
« previous next »