Been trying to install my recently purchased Radeon 9250 card into the A4000T today, but without success. Installation procedure is kindof not-so-intuitive in my opinion, feels more like bringing order into a hippie- happening to get things working.
Anyway, followed the procedures as far up to the point where I am supposed to "click onto" the Radeon icon in Devs/Monitors. What happens then is I get a Software Failure, Program failed on Radeon.
The following has been installed:
- Picasso96 2.1b
- MM_CD_UP2.1
CVision3D in Devs/Monitors has been renamed to Radeon and tooltype set to Radeon. Radeon.card is in Libs:Picasso96. So it should kindof work now.....
I get the following log from SnoopDos before the program failure:
Count Process Name Action Target Name Options Res.
----- ------------ ------ ----------- ------- ----
1 WBL ChangeDir SystemA4k:P96Backup/Devs/Mo
2 WBL Load Radeon OK
3 WBL ChangeDir SYS:
4 Radeon ChangeDir SystemA4k:P96Backup/Devs/Mo
5 ramlib Load LIBS:picasso96/rtg.library OK
6 Picasso96 Open ENV:Picasso96/AmigaVideo Read OK
7 Picasso96 Open ENV:Picasso96/Debug Read OK
8 Picasso96 Open ENV:Picasso96/BlackSwitchin Read OK
9 Picasso96 Open ENV:Picasso96/DirectColorMa Read OK
10 Picasso96 Open ENV:Picasso96/DoNotSetMMU Read OK
11 Picasso96 Open ENV:Picasso96/ShowModes Read OK
12 Picasso96 Open ENV:Picasso96/PlanarOnlyDIP Read OK
13 Picasso96 Open ENV:Picasso96/DisableAmigaB Read OK
14 Picasso96 Open ENV:Picasso96/PlanesToFast Read OK
15 Picasso96 Open ENV:Picasso96/Experimental Read OK
16 Picasso96 Open ENV:Picasso96/EnableBootVGA Read OK
17 ramlib Load LIBS:Picasso96/fastlayers.l OK
18 Radeon Open Radeon.info Read OK
19 Radeon ToolType QUIET Fail
20 Radeon ToolType BOARDTYPE OK
21 Radeon ToolType SETTINGSFILE OK
22 Radeon ToolType MEMORYCLOCK Fail
23 Radeon ToolType SOFTSPRITE Fail
24 Radeon ToolType BIGSPRITE Fail
25 Radeon ToolType BORDERBLANK Fail
26 Radeon ToolType DISPLAYCHAIN Fail
27 Radeon ToolType IGNOREMASK OK
28 Radeon ToolType NOPLANAR2CHUNKYBLITS Fail
29 Radeon ToolType NOBLITTER Fail
30 Radeon ToolType SYSTEM2SCREENBLITS Fail
31 Radeon ToolType QUIET Fail
32 Radeon ToolType OVERCLOCK Fail
33 Radeon ToolType GRANTDIRECTACCESS Fail
34 Radeon ToolType FAKENATIVEMODES Fail
35 Radeon Load LIBS:picasso96/Radeon.card OK
36 Radeon Open ENV:Mediator/RadeonMem Read Fail
37 Radeon Open ENV:Mediator/RadeonInt Read Fail
38 ramlib Load LIBS:pci.library OK
39 ramlib Open ENVARC:Mediator/MMU Read OK
40 ramlib Open ENVARC:Mediator/NoCache Read Fail
41 ramlib Open ENVARC:Mediator/Warp3D Read OK
42 ramlib Open ENVARC:Mediator/Emulation Read Fail
43 ramlib Open ENVARC:Mediator/PatchInt Read Fail
44 ramlib Open ENVARC:Mediator/Buster Read Fail
45 ramlib Open S:Vendors.txt Read OK
pciinfo reports the following:
Pci Device 1:
VendorID: $1002
VendorName: ATI Technologies Inc. / Advanced Micro Devices, Inc.
DeviceID: $5960
DeviceName: RV280 Radeon 9200 Pro
ClassCode: $30000
RevisionID: $1
InterruptPin: 4
SubsystemVendorID: $1092
SubsystemID: $160
MemSpace0: $50000000 - $5fffffff
IOSpace1: $40c06000 - $40c060ff
Finally, the following line is in S:Vendors.txt:
5960 RV280 Radeon 9200 Pro
So I cant fully figure out what is happening when the Radeon icon is clicked, but it seems things start to go astray when the Vendors.txt has been read (I see it because a huge amount of memory is consumed), and this is the last log- entry that SnoopDos reports. One thing that worries me a bit is the possibility that there are debris left from the Voodoo installation, basically I just re- installed MM_CD_UP2.1 and followed the instructions in the RadeonGuide text file. Would be much nicer to install on a fresh system, but Id hate to do a complete system re- installation.
So if anyone have any idea what the problem could be? Like weird ENV/ARC settings or something like that? Any hints are welcome
