EasyNet problem?

[carvedeye]

Well i have completely given up, it just does not want to play but thanks to everyone who helped, EasyNet? easy my arse

[yssing]

Ive personally installed easynet on 3 different amiga, with 3 different setups. A1200 with PCMCIA network, cabled thoug, maybe you should try that. As I never got a wireless to work. Also on an A4k with XSurf and on an A2K with hydranet, and they all work flawlessly.

I dont know if you use DHCP, but if you do, try using a static IP instead.

[yssing]

Also, are you 100% sure your router is using WEP encryption?

[carvedeye]

Yes my router is using wep encrytion

[carvedeye]

Ive got connected through an ethernet card now so will just use that instead. is it normal for me to have to plug in the ethernet adaptor after AmigaOS 3.9 has loaded up as i would really like to leave the card in permantly?

[bbond007]

Yes my router is using wep encrytion

Try and set the KEY to 26 digit HEX code for the WEP. I'm also running dd_wrt on my router. I was never able to get my amiga to connect to a ClearSpot router even without WEP.  If you can't get it to work see if your router supports dd_wrt. Depending on your router, installing dd_wrt can by very simple(if you are lucky), or rather complex and in that case, if you don't follow instructions to every detail you may irreversibly brick your router.  

That is what I did to make mine work. My wireless NIC (from Amigakit) even works great with ShapeShifter.

Under the Amiga I have samba set up so I can attach to shares on my mac and windows7 notebook. its pretty nice

good luck

-nate

[Tension]

@AmigaKit.
Fancy answering my question?

Khat got your tongue?

[carvedeye]

Ive got connected through an ethernet card now so will just use that instead. is it normal for me to have to plug in the ethernet adaptor after AmigaOS 3.9 has loaded up as i would really like to leave the card in permantly?

Anyone?

[bbond007]

For that you need the cardreset program or the PCMCIA reset device from Amigakit.