EasyNet problem?

[carvedeye]

ok here is the video of easynet take a look and see what you all think?

http://www.youtube.com/watch?v=yNY2gBJyg88

[utri007]

If you put virgin.net to your domain, then any virgin.net domains woun't work.

You need to figure something your own, it needs to be something like a addsfasdfkjfsn.local or what ever you want, but not any real domain.

Otherwise you config seems to be ok

Problem seems to be AWeb, try to reinstal it or change cache location?

Can you access any other www pges? Or is it google only wich doesnt work?

[bbond007]

any chance of link to the ibrowse demo? i have tried 2.4 with mui 3.8 but it seems you need a ful version of 2.x?

http://www.ibrowse-dev.net/download.php

[carvedeye]

i cant access any www pages? i will try changing my domian and see how it goes.

[carvedeye]

http://www.ibrowse-dev.net/download.php

That version requires 2.3 to be installed first as I have already tried that version

[bbond007]

That version requires 2.3 to be installed first as I have already tried that version

pretty sure thats where I got mine.

[carvedeye]

Also, have you tried pinging your router once easynet says its online?  Its been a while since I last used it, but I'm pretty sure the Easynet installer installs AmiTCP's ping and traceroute commands.  

Bring up an Amiga shell window, and type ping 192.168.0.1  

If you get replies, you are connected to your Network at least.  If not you will get either 'destination host unreachable' If you have no connectivity at all, or 'request timed out' if you have partial connectivity but there is some configuration problem.

Ihave pinged my router here is a pic of the results.

[OldB0y]

Ihave pinged my router here is a pic of the results.

Just re-installed Easynet to give it a go for you.  You're not getting any replies, which means you are not connected to your router.  I got the same result by pulling out my Ethernet cable (I have a PCMCIA ethernet card rather than a wireless one).

The settings you have in your video look pretty similar to mine.

From another computer that is connected okay, double check the router IP you have is correct. On a Windows PC, bring up a DOS prompt, type 'ipconfig' or 'ipconfig /all' and check the gateway address.  On a Mac, its very similar, bring up Terminal (in applications/utilities), at the prompt type 'ifconfig'

If all the settings are correct, connect to your router from your PC/Mac etc, and check the wireless settings.  The card you have might not like working in a multi mode environment (eg having both 802.11b and 802.11g enabled).  Try setting the router to 802.11b only, as this is almost certainly all the card will support.  Before doing so though, be aware that if your PC etc is using wireless it may not like 802.11b!  You may find you need to re-set the router or use an ethernet cable if your PC loses connectivity at this point.

[utri007]

Can you turn encryption OFF temporarily from your WLAN box?

If your amiga is configured right, it connects nearest unenecrypted wlan automatically, IF you are not configured encryption and wlan sid to AMI TCP

This just to testing purposes

[Tension]

It's around this point that most sane people would go 'f u c k   i t' and just give up.

[carvedeye]

It's around this point that most sane people would go 'f u c k   i t' and just give up.

I am very close believe me

Can you turn encryption OFF temporarily from your WLAN box?

If your amiga is configured right, it connects nearest unenecrypted wlan automatically, IF you are not configured encryption and wlan sid to AMI TCP

This just to testing purposes

I will give it a try and let you know how i get on

[carvedeye]

Can you turn encryption OFF temporarily from your WLAN box?

If your amiga is configured right, it connects nearest unenecrypted wlan automatically, IF you are not configured encryption and wlan sid to AMI TCP

This just to testing purposes

Well tghat did not work either

[don27dog]

Ok here's what i have done i have entered my amiga's IP as 192.168.0.6, i Have entered my netwrok mask as 255.255.255.0, Gateway is my router IP which is 192.168.0.1, Amiga's Host Name is Amiga, Netwrok domain name is 192.168.0.1 (same as my router IP) my DNS Address is (Again) 192.168.0.1. If I have done something wrong please tell.

Try assigning your Amiga 192.168.0.106 it has been a while but I remember having problems with one of my routers not liking anything manually assigned under 100 as the router used those for dchp. As soon as I assigned the amiga higher than 100 everything worked fine.

[Tension]

@AmigaKit.
Fancy answering my question?

[carvedeye]

Try assigning your Amiga 192.168.0.106 it has been a while but I remember having problems with one of my routers not liking anything manually assigned under 100 as the router used those for dchp. As soon as I assigned the amiga higher than 100 everything worked fine.

Thanks will give it a try

[carvedeye]

Well i have completely given up, it just does not want to play but thanks to everyone who helped, EasyNet? easy my arse