Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 ... 36 37 [38] 39 40 ... 223   Go Down

Author Topic: FPGA Replay Board  (Read 821996 times)

Description:

0 Members and 14 Guests are viewing this topic.

Offline freqmax

  • Hero Member
  • *****
  • Join Date: Mar 2006
  • Posts: 2179
    • Show only replies by freqmax
Re: FPGA Replay Board
« Reply #554 on: April 20, 2011, 02:16:45 PM »
Quote from: psxphill;632571
020 is for the picasso driver in UAE-E, the OCS/ECS/AGA driver is not recommended as there has not been much effort put into them yet.


How to enable the Picasso driver in Uae-E ..?

Quote from: psxphill;632571
Then you need 1mb of ram that doesn't disappear after a reboot to store aros in. So if you only have chip ram then you need 2mb of it, so 1mb of it is used for storing aros and the rest is used as chip ram. If you don't have 2mb of chip ram then you need at least 1mb of local fast.
 
When it's complete you'll be able to burn a rom and then it will be alot simpler, except you'll need to figure out how to add 1mb roms.


So the extra 1 MB is for AROS storage. Should not be problem with a ROM-EEPROM replacement. And for Minimig/FpgaArcade it's just to replace the existing one ;)
Logged
 

Offline kolla

Re: FPGA Replay Board
« Reply #555 on: April 20, 2011, 03:05:33 PM »
Note that Minimig has no fast ram at all, even with 4MB, only chip ram and slow ram.
Logged
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
A600/A6095
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM440 and Mac minis with MorphOS
 

Offline freqmax

  • Hero Member
  • *****
  • Join Date: Mar 2006
  • Posts: 2179
    • Show only replies by freqmax
Re: FPGA Replay Board
« Reply #556 on: April 20, 2011, 03:12:17 PM »
I think that's not too hard to change. The only real hard limit is the 32 MB (?) onboard RAM.
Logged
 

Offline xyzzy

  • Jr. Member
  • **
  • Join Date: May 2009
  • Posts: 74
    • Show only replies by xyzzy
Re: FPGA Replay Board
« Reply #557 on: April 29, 2011, 08:28:09 PM »
Logged
 

Offline Iggy

  • Hero Member
  • *****
  • Join Date: Aug 2009
  • Posts: 5348
    • Show only replies by Iggy
Re: FPGA Replay Board
« Reply #558 on: April 29, 2011, 08:57:14 PM »
Quote from: xyzzy;634441
More update goodness!

http://www.minimig.net/viewtopic.php?f=13&t=36&start=67


Wow, that is nice! And tiny too!
Logged
"Not making any hard and fast rules means that the moderators can use their good judgment in moderation, and we think the results speak for themselves." - Amiga.org, terms of service

"You, got to stem the evil tide, and keep it on the the inside" - Rogers Waters

"God was never on your side" - Lemmy

Amiga! "Our appeal has become more selective"
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: FPGA Replay Board
« Reply #559 on: April 29, 2011, 09:11:01 PM »
Quote from: Iggy;632525
In defense of Darrin, that is in no way a stupid question. Why trade a know product for a product that is likely to be slower and less reliable (at least initially)/


Thank you Iggy.  That's exactly my point.  We all have Workbench and if we don't then we can get it the same way we get ADFs of games.  So why use something that almost does the same to replace something that already does what you want it to.

As you pointed out, I wasn't having a go at AROS but rather pointing out that we already have a tried and tested solution.  :)
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: FPGA Replay Board
« Reply #560 on: April 29, 2011, 09:12:49 PM »
Quote from: kolla;632539
Maybe not the first time it was asked, but this one has been asked and answered umpteen times already. And the answer is pretty obvious too. The question is pretty much on the same level as "What is the advantage of using ReactOS over Windows?"


Yeah, the answer is obvious:  NONE.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: FPGA Replay Board
« Reply #561 on: April 29, 2011, 09:18:36 PM »
Quote from: vidarh;632595
Of course, you can use KingCON and all the other fixes and workarounds instead. The fact that most people do is why a "modern" AmigaOS 3.x system is a heap of kludges and patches and commodities and replacements for OS files.  AROS provides a way out of that, and allows us to create a nice clean foundation and improve that directly instead.


My point is, that until AROS provides the same compatability as the "heap of kludges" then it continues to make sense to use the "heap of kludges" instead.

Yes, it will be nice to have an AROS install that works as a 100% compatable Workbench 3.x replacement and installs in one go instead of in various steps.  Let me know when that happens and meanwhile I look forward to seeing HDF files of AROS installs released on a regular basis which I can test.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline TheBilgeRat

  • Hero Member
  • *****
  • Join Date: May 2010
  • Posts: 1657
    • Show only replies by TheBilgeRat
Re: FPGA Replay Board
« Reply #562 on: April 29, 2011, 09:33:47 PM »
I'm pretty sure AROS is a heap of kludges as well.  That is just how it is with Operating Systems.  We ain't programming with dip switches anymore :D
Logged
 

Offline desiv

  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 1270
    • Show only replies by desiv
Re: FPGA Replay Board
« Reply #563 on: April 29, 2011, 10:03:33 PM »
Quote from: Darrin;634445
Yeah, the answer is obvious:  NONE.
I also thought the answer was obvious: LICENSING

:lol:
desiv
Logged
Amiga 1200 w/ ACA1230/28 - 4G CF, MAS Player, ext floppy, and 1084S.
Amiga 500 w/ 2M CHIP and 8M FAST RAM, DCTV, AEHD floppy, and 1084S.
Amiga 1000 w/ 4M FAST RAM, DUAL CF hard drives, external floppy.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: FPGA Replay Board
« Reply #564 on: April 29, 2011, 10:21:09 PM »
Quote from: desiv;634454
I also thought the answer was obvious: LICENSING

:lol:
desiv


As opposed to "pirating".  :D

Fair point, if it works.  :)
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline freqmax

  • Hero Member
  • *****
  • Join Date: Mar 2006
  • Posts: 2179
    • Show only replies by freqmax
Re: FPGA Replay Board
« Reply #565 on: April 29, 2011, 10:53:59 PM »
LICENSING = Hordes of evil lawyers.

AROS-m68k is also in the beginning. It's the first actually working version. But that's also means one can have a starting point in something that works. Instead of writing lot's of code and hope it succedds.
Logged
 

Offline TheGoose

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: FPGA Replay Board
« Reply #566 on: April 29, 2011, 11:24:51 PM »
Has anyone mentioned in this thread about laptop option? I think we have but I'll do it again. It's pretty skinny, it could maybe become mobile Amiga. With the right kinda of kit. Would have keyboard, screen, a place to mount it down, power supply, battery solution etc.

Oh, people are all over that apparently

http://www.mini-itx.com/2007/01/19/the-itx-laptop

We could do better though.
Logged
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline AJCopland

Re: FPGA Replay Board
« Reply #567 on: May 02, 2011, 12:09:06 PM »
Quote from: xyzzy;634441
More update goodness!

http://www.minimig.net/viewtopic.php?f=13&t=36&start=67



That... I WANT THAT!
Logged
Be Positive towards the Amiga community!
 

Offline Methanoid

  • Full Member
  • ***
  • Join Date: Jan 2004
  • Posts: 147
    • Show only replies by Methanoid
Re: FPGA Replay Board
« Reply #568 on: May 02, 2011, 02:36:43 PM »
Any idea what the EXPANSION board is going to cost (with AND without 060)?

I've got money put aside for Replay and now need to for this goodie!
Logged
 

Offline freqmax

  • Hero Member
  • *****
  • Join Date: Mar 2006
  • Posts: 2179
    • Show only replies by freqmax
Re: FPGA Replay Board
« Reply #569 from previous page: May 02, 2011, 09:04:42 PM »
Let's be happy if the baseboard makes it out of the door first..
Logged
 
Pages: 1 ... 36 37 [38] 39 40 ... 223   Go Up
« previous next »