A600HD in a A500 Cabinet
I had an A500 rev5 already limped slightly with yellow, green and red boot screens once in a while.
I pulled the motherboard out and put an A600 motherboard i had in spare, with a Kick 2.05 rev. 37,350 in.
Customized the expansion trap door a little so I could use the PCMCIA slot, and put a CF card reader on the back, and also put the joy stick ports on the back where i think they belonged.
I kept the A500 disk drive, but put a green LED on that indicates when the drive is active, although i can not fail to hear it;)
Then I made a hardware hack I found online for A500 keyboard to A600 MOBO, so it could run on the motherboard.
It worked, also the Reset (Ctrl+A+A) keys and the numeric keypad works.
'Power' and 'Drive' LEDs is connected to the motherboard, so the 'Drive' flashes when ide port running.
So it all ended up with an alternative solution with A500/A600 HD.
Link ->
http://www.amiga.org/gallery/index.php?n=3340More pictures in my gallery
Link ->
http://www.amiga.org/gallery/index.php?u=5970Reg .SDH.