Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Up to BB3. Scsi problem  (Read 994 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline RetrofanTopic starter

  • Hero Member
  • *****
  • Join Date: Mar 2010
  • Posts: 507
Up to BB3. Scsi problem
« on: July 16, 2010, 11:21:39 PM »
Hello:
I have a extrange problem. I have had BB3 installed in my 32gb Transcend cf before without problems. The thing is when I installed the subway, it was BB1 that was installed. Over it I have made changes like the WBControl patch to save ram memory. I have the Subway running fine with BB1..
 
The thing is that I can install BB2, but after I install BB3 I get a message:
"DEVS: scsi.device Program failed (error #80000004)"
 
Ok, I thought perhaps could have been better to install first BB3 and later the Poseidon program, but the bizarre, extrange thing is that I have a copy of the previous (no Poseidon) BB3 System installation which I was using. I don't understand, but I get the same message I've written with this System copy.
 
How can it be? What is this scsi.device problem?
« Last Edit: July 16, 2010, 11:24:10 PM by Retrofan »
Logged
A1200, Lateral 32GB CF, internal Dvd, ACA 1230/56 with an MKII Fast ATA at 9,5Mb/s, another A1200 BPPC project in progress (more or less), and posting from my own/better C64x in my Tv using Hdmi.
 

Offline RetrofanTopic starter

  • Hero Member
  • *****
  • Join Date: Mar 2010
  • Posts: 507
Re: Up to BB3. Scsi problem
« Reply #1 on: July 17, 2010, 12:50:30 AM »
I apologize. I know on weekend there are a lot of people there, and perhaps trying to help me. I dind't write it well (I separated the lines in the Startup-sequence). Now I have BB3 installed
 
Sorry again.
Logged
A1200, Lateral 32GB CF, internal Dvd, ACA 1230/56 with an MKII Fast ATA at 9,5Mb/s, another A1200 BPPC project in progress (more or less), and posting from my own/better C64x in my Tv using Hdmi.
 

Offline RetrofanTopic starter

  • Hero Member
  • *****
  • Join Date: Mar 2010
  • Posts: 507
Re: Up to BB3. Scsi problem
« Reply #2 on: July 17, 2010, 02:10:20 AM »
Well, I will use this thread again. Ok, I've got BB4 running right (more or less, but doesn't matter).
 
The thing is that in the last weeks I've began to look more carefully to the Chip memory, as it's very important.
 
The question now is very simple: with BB1 and BB2 I had a 75% or free chip ram, but now with BB4 I have 49%.
 
WHERE'S MY BENEFIT?
« Last Edit: July 17, 2010, 02:58:58 AM by Retrofan »
Logged
A1200, Lateral 32GB CF, internal Dvd, ACA 1230/56 with an MKII Fast ATA at 9,5Mb/s, another A1200 BPPC project in progress (more or less), and posting from my own/better C64x in my Tv using Hdmi.
 
Pages: [1]   Go Up
« previous next »