OK, So I ordered a Buddha for my Amiga2000; but the instructions are scant...at best and I can't find any FAQ's on the web.
I've plugged in the Buddha, attached a 40pin CF-IDE adapter and put on a 2GB CF card.
My Buddha can't see it; at least not using HDToolbox that is. Strangely enough when the bus is scanning for devices using the HDToolBox, the led on the CF adapter goes mad; indicating that it can be 'seen' and 'spoken' too.
But alas I dont get the option to partition up the CF card, and therefore dont get the option to install WB.
The A2K has 4MB RAM, 1MB Chip, it's a REV6.2 running ROM3.1.
Any help appreciated.