Welcome, Guest. Please login or register.

Author Topic: Buddha. How To???!??  (Read 2945 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mchaggisTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2008
  • Posts: 85
    • Show only replies by mchaggis
Buddha. How To???!??
« on: March 06, 2009, 09:48:21 AM »
OK, So I ordered a Buddha for my Amiga2000; but the instructions are scant...at best and I can't find any FAQ's on the web.

I've plugged in the Buddha, attached a 40pin CF-IDE adapter and put on a 2GB CF card.

My Buddha can't see it; at least not using HDToolbox that is. Strangely enough when the bus is scanning for devices using the HDToolBox, the led on the CF adapter goes mad; indicating that it can be 'seen' and 'spoken' too.

But alas I dont get the option to partition up the CF card, and therefore dont get the option to install WB.

The A2K has 4MB RAM, 1MB Chip, it's a REV6.2 running ROM3.1.

Any help appreciated.
 

Offline keropi

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show only replies by keropi
Re: Buddha. How To???!??
« Reply #1 on: March 06, 2009, 09:59:30 AM »
propably a bad adapter/cf combo... ahve you tried another?
 

Offline StarejMraf

  • Newbie
  • *
  • Join Date: Mar 2009
  • Posts: 2
    • Show only replies by StarejMraf
Re: Buddha. How To???!??
« Reply #2 on: March 06, 2009, 10:05:06 AM »
Buddha doesn´t work with any CF-IDE adapters. But e.g. Transcend ide flash disk work correctly.
Amiga 500, 600, 1200, Efika, SAM440ep
 

Offline pyrre

Re: Buddha. How To???!??
« Reply #3 on: March 06, 2009, 10:19:25 AM »
What WB version do you have?
My cf adapters are not seen by HDtoolbox from os 3.0/3.1
But it is very well seen from OS3.9s HDToolbox...
After 3.9 has partitioned the cf card it is shown by any WB and i can format the partitions.
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder
 

Offline mchaggisTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2008
  • Posts: 85
    • Show only replies by mchaggis
Re: Buddha. How To???!??
« Reply #4 on: March 06, 2009, 10:49:42 AM »
Nah only got the one, another is on the way from Hong Kong, quite possibly on a slow boat...
 

Offline mchaggisTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2008
  • Posts: 85
    • Show only replies by mchaggis
Re: Buddha. How To???!??
« Reply #5 on: March 06, 2009, 10:52:26 AM »
WB3.1, I have WB3.5 on CD, but need to get the Buddha working to take advantage of that.
 

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show only replies by Iggy_Drougge
    • http://www.kristallpojken.org
Re: Buddha. How To???!??
« Reply #6 on: March 06, 2009, 04:33:19 PM »
The Buddha ignores camera flash cards. The only alternative is to buy an "industrial" CF card or to tell the card to identify itself as a hard drive, using a small MS-DOS program. This works with Sandisk cards, I don't know if it works with other brands.
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net
 

Offline blanning

  • Sr. Member
  • ****
  • Join Date: May 2008
  • Posts: 367
    • Show only replies by blanning
    • http://www.brianlanning.com
Re: Buddha. How To???!??
« Reply #7 on: March 06, 2009, 06:50:26 PM »
Quote

Iggy_Drougge wrote:
The Buddha ignores camera flash cards. The only alternative is to buy an "industrial" CF card or to tell the card to identify itself as a hard drive, using a small MS-DOS program. This works with Sandisk cards, I don't know if it works with other brands.


Do you have a link to that msdos program?  I'll be doing a similar project this weekend.

brian
 

Offline tnt23

  • Full Member
  • ***
  • Join Date: Dec 2005
  • Posts: 195
    • Show only replies by tnt23
Re: Buddha. How To???!??
« Reply #8 on: March 06, 2009, 07:40:46 PM »
Quote

StarejMraf wrote:
Buddha doesn´t work with any CF-IDE adapters. But e.g. Transcend ide flash disk work correctly.


My configuration on 3000 for quite some time consisted of mounting bracket CF-IDE hooked to Buddha. I remember I had to use either HDInstTools or some other HDToolBox from a Buddha floppy, since the CF didn't show up with original HDToolBox.
 

Offline Marcb

  • Sr. Member
  • ****
  • Join Date: Nov 2007
  • Posts: 407
    • Show only replies by Marcb
Re: Buddha. How To???!??
« Reply #9 on: March 06, 2009, 09:39:37 PM »
Quote

tnt23 wrote:
Quote

StarejMraf wrote:
Buddha doesn´t work with any CF-IDE adapters. But e.g. Transcend ide flash disk work correctly.


My configuration on 3000 for quite some time consisted of mounting bracket CF-IDE hooked to Buddha. I remember I had to use either HDInstTools or some other HDToolBox from a Buddha floppy, since the CF didn't show up with original HDToolBox.


I've got two CF cards running off a Buddha: one in Amiga 2000 and the other in an Amiga 3000.... I don't remember doing anything special to set them up other than partitioning and formatting them both with WinUae...
"...but some animals are more equal than others."
 

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show only replies by Iggy_Drougge
    • http://www.kristallpojken.org
Re: Buddha. How To???!??
« Reply #10 on: March 06, 2009, 11:11:56 PM »
Quote

Marcb wrote:
I've got two CF cards running off a Buddha: one in Amiga 2000 and the other in an Amiga 3000.... I don't remember doing anything special to set them up other than partitioning and formatting them both with WinUae...

It would be interesting to know what cards you're using, since most people are having problem with Buddha and CF.
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net
 

Offline Marcb

  • Sr. Member
  • ****
  • Join Date: Nov 2007
  • Posts: 407
    • Show only replies by Marcb
Re: Buddha. How To???!??
« Reply #11 on: March 06, 2009, 11:21:39 PM »
Quote

Iggy_Drougge wrote:
Quote

Marcb wrote:
I've got two CF cards running off a Buddha: one in Amiga 2000 and the other in an Amiga 3000.... I don't remember doing anything special to set them up other than partitioning and formatting them both with WinUae...

It would be interesting to know what cards you're using, since most people are having problem with Buddha and CF.


Hmmm... Well, I'm not going to be much help then because both are  4gb 'DSE' Compact Flash cards, DSE is a chain of Australian electronics retail stores... I assume they buy them from an o/s supplier and rebadge them, but how to find out the original brand???


DSE LINK
"...but some animals are more equal than others."
 

Offline mchaggisTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2008
  • Posts: 85
    • Show only replies by mchaggis
Re: Buddha. How To???!??
« Reply #12 on: March 07, 2009, 03:16:33 AM »
Well I've just gone out and bought a 160GB PATA HDD; dropped it in and connected up first time. And given the MASSIVE price difference between CF and an IDE drive, based upon storage, I reckon I've made the right decision.

8GB CF = 160GB IDE; with 20 bucks spare :)
 

Offline Marcb

  • Sr. Member
  • ****
  • Join Date: Nov 2007
  • Posts: 407
    • Show only replies by Marcb
Re: Buddha. How To???!??
« Reply #13 on: March 07, 2009, 09:22:15 AM »
That's great, the Buddha is up and running then?
"...but some animals are more equal than others."
 

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show only replies by Iggy_Drougge
    • http://www.kristallpojken.org
Re: Buddha. How To???!??
« Reply #14 on: March 07, 2009, 09:06:03 PM »
Quote

Marcb wrote:
4gb 'DSE' Compact Flash cards, DSE is a chain of Australian electronics retail stores... I assume they buy them from an o/s supplier and rebadge them, but how to find out the original brand???


Perhaps it says in HDtoolbox.
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net