a4000 csppc EXCEPTION ERROR ON RAMLIB_PPC WHEN OPENS WARD3D APSS!!!HELP!!! PROBLEM SOLVED!!

[jj]

@crumb

Will make-cd burn the morphos iso with the correct filenames and attributes?

OR what burning software on the pc would you recomend ?

Alchol 120% ?  any partiuclar settings ?

[mike-]

Try reseating your cpu cards, something strange seems to happen whey theire stessed

[wawrzon]

@mike:
c'mon, you would have random crashes if this was some hardware contact issue. our prob is positively due to sw failure/sys setup.

[mike-]

well im having some of the same issues, and i have no clue why , tho it seems to change if i reseat the card, now i've pretty much bolted it in there however

[tolishot]

reseating the ppc card?why?i dont have any of this problems!anyway the os4 working fine!if the csppc card exist this problem the os4 cannot run!i hope to be the libs problem!not hardware!the other solution is to install morphos os! :-?

[Crumb]

@JJ

MakeCD should toast it correctly :-)

If you use a PC I think WinRAR will unpack the files correctly but I'm not sure about the burning options. Use a CDRW so you can toast it again if you find out file attributes are not OK.

[wawrzon]

i made morphos-cd and am buying os4 but im not so sure if the systems will offer functionality i need, morphos most possibly not. i would prefer to stick to 3.9 for now especially as it is nearly perfectly configured.
by the way, i would not fiddle too much with an csppc since they get easily broken, ive heard

[tolishot]

you have broken your csppc?in my condition the problem shows after crash my hard disk!after that i dont know what happens  the software never works like the last installation on the broken hard disk!!i try today to fix the broken disk and if the works after i will copy this disk in another new.then i hope to see what libs i put it there and the differense on the new installation.the new installation shows the exception error!in the broken disk never shows that!!i am confused about that!i must to find the mistake!and then i post with big letters I FOUNDED!!!!!  :-D

[wawrzon]

you have broken your csppc?

no, i havnt. i have only got one, and installed it for the first time some weeks ago. but this in a known issue.

so u had a working configuration and the problem occurs after you lost some files or reinstalled the system i understand. i would be really eager to know what makes the difference. my custom kickstart seems not to be the reason since the problem exists with romoff jumper set on my deneb too.

[tolishot]

take care for the csppc!!it is very sensitive device!in my case i will put out the 68060/50 and put another one 68060/66.
crystal and other working fine.in cvppc i put in all chips metall cooling from zalman or other..!

[tolishot]

[wawrzon]

im not sure if im going to overclock it at the moment. maybe the ppc part as its only 150mhz but i will look to that separatly

[tolishot]

ok!better solution is cooling!the differense about the overclock is to small!from 200 to 233 on the ppc cpu is stable but to hot from beggining!i will put out  the original cooler and construct other from asus mainboard chipset.is to tall from old and too cold!with chipset fan is best.my two cards is  cold from start and after playning 10 3d demos following its other!for best solution put a 8cm or 12cm fan 12v from the side of ram!maybe some message appears from hot environment!
after 3 hours i send you some fotos to see ok?cu later!

[tolishot]

BINGO!!!!MY PROBLEM IS SOLVED!!!COOL!I FOUND THE PROBLEM!!MY CSPPC WORKING FINE WITH ALL WARP3D APPS!!WARPOS WORK OK TOO! :-D  :-D  :-D  :idea:  :idea:  :roll:  :rtfm:

[tolishot]

ok!i have fix the problem of the csppc.works fine to all 3d apps!the problem is the cgx driver!i install the ver 42.0 of cgx!after that run it the planet potion demo!cool to all!after that the potion option!the same !!runs fine!all the 3d demos heretic game works!i hope to help for this!! :rtfm:

[keropi]

nice!