a4000 csppc EXCEPTION ERROR ON RAMLIB_PPC WHEN OPENS WARD3D APSS!!!HELP!!! PROBLEM SOLVED!!

[tolishot]

thanks for advise!i try to run the stuckaid and i tell you what happens! :idea:

[CLS2086]

Try also Blitzkick with excellent modules and params, it saved from a similar situation.
And guess who wrote it ?  :lol:

[tolishot]

when i run the stackaid both iprefpatch  and ramlibpatch show crash message 87000004!!
anyone help!!! :boohoo:  :boohoo:  :pissed:

[tolishot]

this exceptions shows when the ppc cpu is ded??
if is ded why the warpos demos working fine?
and why the os4 working on ppc correctly?ideas???

[Framiga]

@tolishot

goto the CSPPC boot menu (push on ESC during the boot) and set the waitstates for PPC (in the RAM section) to "Nowaitstates"

and if this doesn't helps, download and install this powerpc.library

[tolishot]

i hope to fix this library!
the waitstates is disable from menu!i have select the 60ns setting.i try and the 70ns.but the same.before this message my a4000 works fine.i am stupid because my amiga works great to all progs.and then i install some other libs ppc and then...
the end.my hard disk broken and i put another one hard disk.install os3.9 bb1..bla bla and after all ward3d refuse to play!!thats all!i hope to play!!thanks!in few houres i tell you if play my amigi!! :getmad:  :getmad:

[Crumb]

@tolishot

perhaps you should try the games on MorphOS... some of them will run better than under OS3.9 :-)

[tolishot]

tell me how to install morphos on my amiga?details thanks!

[keropi]

http://powerup.morphos-team.net

there is also a detailed readme with instructions in the .ISO

[Crumb]

I wrote this for a friend although it's not 100% right, I'm open to corrections ;-)
_________________________________________________________
*HOW TO INSTALL MORPHOS IN YOUR PPC CLASSIC MIGGY*
Updated by Crumb on 29/05/2008

Download latest version from:
http://powerup.morphos-team.net/

points to keep in mind:
-create the partition in the first 4GB of the HD
-it's better to format the partition with FFS from AmigaOS3.1 or even
better,use Aminet's SFS. Don't use Jörg Strohmayer's SFS. It could
work with OS3.5/OS3.9 FFS but it could cause problems.
-Unpack the ISO in that partition. If you burn the CD using peecee
software be careful with filename length and executable attributes.
-Check out that all monitors located in devs/monitors have set the
"executable" flag. You can set it using icon information.
-Download the kickstart modules for paula sound and floppy disk from
the following address:
http://skolman-mws.w.interia.pl/mos/extmodules.lha
if you can't access those modules you can extract the modules by
yourself from your ROM3.1 (not an A500/A2000 one!) using the programs
Luciferin or REMUS.
-Copy the modules to boot/extmodules
-NEVER user ED nor MEmacs nor Notepad to edit MorphOS PowerUp
startup-sequence. Use CygnusED, GoldED or any editor that doesn't
trunk line length to 255 characters
-Modify your Startup-sequence and be careful with the following lines:
*Don't use real kickstart as it's useless because you only would like
to use disk drive and paula audio modules (and these modules are
already located at your extmodules directory). You must have this line
active:
set kickstart "nokickstart"
*The booting device should include the text
"bootdevice=yourpartition". I can't remember if it's mandatory to
include the two points at the end of the device name. E.g.:
set bootdevice "bootdevice=MorphOS-HD"
*You must set the resetlevel of your machine correctly. If it doesn't
boot with default resetlevel try values 3 for BlizzardPPC or 5 if you
own a CyberstormPPC. If it doesn't work try with higher ones.
*You will have to change last line so it references
"module1.rom.idehack" instead of "module1.rom". Of course, you could
also rename the files inside the boot directory so you don't have to
change the startup-sequence line.

-If you have some MAPROM options enabled MorphOS may not boot. If you
have problems you can try to disable MAPROM and special options.
_________________________________________________________

[tolishot]

and drivers?cvppc? libs ppc and others?

[wawrzon]

i do seem to have a similar problem, if i start any of warp3d demos except warptest i receive something like that:


regular warpup apps work actually with no probs. i tried the above patches but with no succes. anyone knows what to do?

[Crumb]

@tolishot

CVPPC works out of the box :-) You don't need to install any lib because PowerUp/WarpOS compatibility is built in. If you had a Voodoo3 you would even have Rave/Warpd3d support built in but Permedia2 3D part is not supported so you need to download Warp3D from here:http://aminet.net/package/driver/video/Warp3D-4.2a

MorphOS includes native PPC drivers for the CSPPC UWSCSI controller, motherboard IDE controller, and A4000T scsi controller.

You can use your AmigaOS3.x drivers for example network drivers directly (well, xsurf works better if you use a patched AriadneII device, just like on OS4).

If you use a sound card you would only have to install the m68k driver, the rest of the AHI system is PPC native.

[tolishot]

i have the same problem!!download from aminet the stackaid tool.run it and tell us what to do to your mashine! :getmad:

[wawrzon]

ive tried that already. ramlibpatch answers with "patch done!"  but has no effect on the demos, they crash either way. anyway i have usually stackattack activated in my s-s with following options:
c:stackattack minstack40000 addstack=8192
but have commented it out for now since it was mostly needed for afaos, i recall and do not enabled it for a while.

the system is massively patched, with a custom kickstart in the deneb-flashrom, all latest updates inclusive. but it is comletely stable apart of the issue. maybe that is causing the problem anyway but i dont think so. i will check it through.

tolishot wrote:
i have the same problem!!download from aminet the stackaid tool.run it and tell us what to do to your mashine! :getmad:

[jj]

@crumb

Will make-cd burn the morphos iso with the correct filenames and attributes?

OR what burning software on the pc would you recomend ?

Alchol 120% ?  any partiuclar settings ?