My medconfig/warp 3d report

[Gav]

Hi
Ok i think i now have Warpup installed correctly because i can now get earth 2140 to run pretty good.
Now when i try to start the shogo demo the game trys to scan renderers and then i get a ppc exception error and the same happens when i try the warp 3d gears ppc demo.

Now when i first installed warp3d from the mediator cd for some reason it seems to install the A3000/4000 warp3d files so i had to remove them and copy the files i needed manually.

Now i wasn't sure if i needed the no mmu files?or the mmu files so here is my medconfig report so hopefully someone can spot the problem.



*** Envarc: variable settings: ***

MMU = No, previous setting: No

NoCache = Yes, previous setting: Yes

Emulation = No, previous setting: No

PatchInt = No, previous setting: No

VoodooMem = 8, previous setting: 8

VoodooInt = Yes, previous setting: Yes

Warp3D = Yes, previous setting: Yes

VirgeMem = Not Set, previous setting: Not Set

VirgeInt = Not Set, previous setting: Not Set

Gfxaddr = 0, previous setting: 0

Memsize = Not Set, previous setting: Not Set

FastEthernet = 0, previous setting: 0

tv.prefs file name = PixelView PlayTV pro, previous setting: PixelView PlayTV pro

Tuner = Not Set, previous setting: Not Set

Background = RED=170 GREEN=170 BLUE=170, previous setting: RED=170 GREEN=170 BLUE=170


*** Mediator System Files versions: ***

pci.library - ver.5.9 (8420 bytes)
PciInfo - ver.1.2 (8088 bytes)
MediatorNET.device - ver.2.6 (5996 bytes)
Voodoo.card - ver.4.18 (15260 bytes)
Virge.card - ver.1.7 (11936 bytes)
Vendors.txt - ver. info N/A (156149 bytes)
MedConfig - ver.1.3 (94013 bytes)

*** Mediator Multimedia CD Files versions: ***

FastEthernet.device - ver.1.7 (6676 bytes)
mixer.library - ver.1.4 (3572 bytes)
fm801.audio - file N/A
FM801 - file N/A
sb128.audio - ver.4.7 (6344 bytes)
SB128 - ver. info N/A (2032 bytes)
SBMixer - ver.1.3 (1928 bytes)
tv.library - ver.1.13 (8224 bytes)
TV - ver.1.3 (1956 bytes)
tv.vhi - file N/A

*** Spider Files versions: ***

poseidon.library - file N/A
spider.device - file N/A
DriveSpeed - file N/A

*** Warp 3D files versions: ***

Warp3D.library - ver.4.2 (67648 bytes)
Warp3DPPC.library - ver.4.2 (101020 bytes)

*** Warp 3D for A3/4000 files versions: ***

W3D_Picasso96.library - file N/A
W3D_Picasso96_PPC.library - file N/A
W3D_AvengerBE.library - file N/A
W3D_AvengerBE_PPC.library - file N/A
W3D_AvengerLE.library - file N/A
W3D_AvengerLE_PPC.library - file N/A

*** MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96MU.library - file N/A
W3D_AvengerBEMU.library - file N/A
W3D_AvengerLEMU.library - file N/A

*** NO_MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96M.library - ver.4.2 (12780 bytes)
W3D_Picasso96M_PPC.library - ver.1.0 (35292 bytes)
W3D_AvengerBEM.library - ver.4.2 (535304 bytes)
W3D_AvengerBEM_PPC.library - ver.4.2 (443516 bytes)
W3D_AvengerLEM.library - ver.4.2 (535388 bytes)
W3D_AvengerLEM_PPC.library - ver.4.2 (411612 bytes)

*** Other files versions: ***

AmigaOS ROM Update - ver.44.26 (127956 bytes)
rtg.library - ver.40.3945 (216548 bytes)
emulation.library - ver.40.389 (39652 bytes)
Picasso96API.library - ver.2.300 (24520 bytes)
ahi.device - ver.5.6 (58416 bytes)
68040.library - ver.43.0 (692 bytes)
68060.library - ver.46.15 (103596 bytes)
warp.library - ver.5.1 (21288 bytes)
ppc.library - ver.0.9 (70148 bytes)


model - , gfx - , zorro - , pcmcia - ,
serial - , ppc - , mmu030 - , mmulib - ,
nocache - , emulation - , warp3d - , pci - .


startup-sequence:

BPPCFix INSTALL >NIL:
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9

If EXISTS C:SquirrelSCSI
    C:SquirrelSCSI
EndIf

Set SCSIUpdate 1
    Set SCSIUpdate 0
EndIf
If EXISTS SYS:Expansion/XSurfIDE
    Set SCSIUpdate 0
EndIf
If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
    Set SCSIUpdate 0
EndIf
If $SCSIUpdate EQ 1
    SetPatch QUIET
Else
    SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf
Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
  Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:


PciInfo report:


Pci Device 1:
   VendorID: $121a
   VendorName: 3dfx Interactive Inc
   DeviceID: $5
   DeviceName: Voodoo3 All Voodoo3 chips, 3000
   ClassCode: $30000
   RevisionID: $1
   InterruptPin: 1
   SubsystemVendorID: $121a
   SubsystemID: $57
   MemSpace0: $80000000 - $81ffffff
   MemSpace1: $82000000 - $83ffffff
   IOSpace2: $eb6000 - $eb60ff
   RomSpace: $84000000 - $8400ffff

Pci Device 2:
   VendorID: $1274
   VendorName: Ensoniq
   DeviceID: $1371
   DeviceName: ES1371 AudioPCI
   ClassCode: $40100
   RevisionID: $6
   InterruptPin: 3
   SubsystemVendorID: $1274
   SubsystemID: $1371
   IOSpace0: $eb6400 - $eb643f

Pci Device 3:
   VendorID: $109e
   VendorName: Brooktree Corporation
   DeviceID: $36e
   DeviceName: Bt878 MediaStream Controller
   ClassCode: $40000
   RevisionID: $11
   InterruptPin: 4
   SubsystemVendorID: $70
   SubsystemID: $13eb
   MemSpace0: $84010000 - $84010fff

Pci Device 4:
   VendorID: $109e
   VendorName: Brooktree Corporation
   DeviceID: $878
   DeviceName: Bt878 Video Capture (Audio Section)
   ClassCode: $48000
   RevisionID: $11
   InterruptPin: 4
   SubsystemVendorID: $70
   SubsystemID: $13eb
   MemSpace0: $84011000 - $84011fff

Pci Device 5:
   VendorID: $10ec
   VendorName: Realtek Semiconductor
   DeviceID: $8139
   DeviceName: RT8139A/B/C Fast Ethernet Adapter
   ClassCode: $20000
   RevisionID: $10
   InterruptPin: 1
   SubsystemVendorID: $10ec
   SubsystemID: $8139
   IOSpace0: $eb6800 - $eb68ff
   MemSpace1: $84012000 - $840120ff


ShowConfig report:

PROCESSOR:    CPU 68060/68060fpu/68060mmu
CUSTOM CHIPS:    AA PAL Alice (id=$0023), AA Lisa (id=$00F8)
VERS:    Kickstart version 40.68, Exec version 40.10, Disk version 45.2
RAM:    Node type $A, Attributes $505 (FAST), at $60000000-$6BF7FFFF (191.5 meg)
    Node type $A, Attributes $703 (CHIP), at $1000-$1FFFFF (~2.0 meg)
BOARDS:
 Board (Index Information Ltd):   Prod=2206/40($89E/$28) (@$EA0000 128K)
 Board (Index Information Ltd):   Prod=2206/168($89E/$A8) (@$200000 8meg)
 Board + ROM (HD?) (phase 5):   Prod=8512/110($2140/$6E) (@$F00C34 128K)

[Gav]

Anyone?

[AmigaMance]

I wish i could help you but i don't have a mediator/Voodoo3, just a BVision and the software config is much different. (CGFX instead of P96, etc.) Shogo demo runs ok on my system.
 Consider this post a bump to your thread. :-)

[Gav]

Yeah it's pretty annoying really as from what i can see it seems ok?and if earth2140 works fine then my warpup must be installed correct so the problem must be with Warp3D.

[Bamiga2002]

Use WOSPrefs to set WarpOS variables. Oh, and delete all Shogo files from ENVARC: and ENV: then launch the game again. It worked for me.

[Gav]

Set what variables exactly?what should i change??I currently un-checked the No patch box aswell as switching termintor 2 to Terminator 0.

Can someone not upload there medconfig report or something so that i can compare there warp3d libs and what not as this is driving me insane and no one seems to have an answer.

Surely there are more people who are running a mediator/Bppc with warpos and warp3D.

[jimmyboy]

Try terminator 1 setting if you have the ppclibemu files installed.

[Gav]

Thanks for the reply,just tried terminator 1 and gears ppc demo still reports a exception error.

[stopthegop]

The gearsppc runs awesome on my machine, but its an A4000 not A1200.  I have PowerUp "Terminator2" selected.  "No Patch" is checked.  VideoAddress is set to "Always".  No other options are checked.  I have ppclibemu.library installed in LIBS: and I "initialize" it in my startup-sequence like this, "c:ppcinstall >NIL:".  One reason the demos might be failing on your machine is insufficient stack memory.  Try using the "stack" command and set to a higher value.  Another possible cause is hardware-  specifically, memory.  Are you running 60ns or 70ns SIMMs?
Do you have the memory speed set accordingly in the Blizzard's NVRAM?  In order to run at 60ns, the memory must be high quality, seated properly, and be in exactly matched sets.  Again, my setup is an A4000 so all of what I said may not apply in your system (I've never owned a Blizzard cardd and I'm really not sure how different they are from the Cyberstorms..).  The only other thing I noticed from your initial post was the ENV-Variable "Memsize".  I believe that should be set to "256" if you have a Voodoo Card with 16M and "512" otherwise.  There is also a jumper on the Mediator which corresponds to this value (at least there is on mine).  Another thing to check is your Picasso96 tooltypes and environment variables.  Overclocking enabled?  Blitter enabled/disabled?  Clockfrequency set right?  Etc..  From what you report, I kind of suspect the problem is your RAM and/or memory settings.  

[Bamiga2002]

Download WOSPrefs and PPCLibEmu, then look at them docs :rtfm: supplied. Terminator value i use is 0.

[nasty]

Prefs/Env-Archive/mediator

mmu=no
nocache=no
voodooint=yes
patchint=no
emulation=no
voodoomem=15
warp3d=yes

Prefs/Env-Archive/powerpc

memprot=0
debug=0
earlyterm=0
force=1
gfxaddress=$200000
hidewarning=0
seginfo=100
teminator=2

Prefs/Env-Archive/powerpc

amigavid= 15khz
blackswitching=no
debug=no
directcolormask=no
disableamigablitter=no
donotsetmmu=no
enablebootvga=no
experimental=yes
planaronlydipfduf=no
planestofast=yes
showmodes=all

Devs/monitors/voodoo icon

boardtypr=voodoo
borderblank=yes
bigsprite=no
softsprite=no
ingoremask=yes
displaychain=no
fakenativemodes=no
fontfix=no
granddirectaccess=no
memoryclock=166
overclock=no

[stopthegop]

There's a simple little tool on Aminet called ppcmemtest, or something like that.  Give that a try and see if your RAM passes.  

[Gav]

This to much argh lol,so i tried the ppc memtest program and everything came back as ok.
My warpos must be all working good since Earth 2140 runs fine,i really dislike Warp3D i mean it installs the damn 3/4000 version for some weird reason.

With all these seperate programs doing all these diffrent things its very hard to pinpoint the probelm.
Very frustrating indeed,the 68k gears demo used to work but now it wont either same goes for the warptest aswell.

[Gav]

Hmm,are all these libs supposed to be in my picasso96 drawer in libs?

Virge.card
Voodoo.card
rtg.library
fastlayers.library
emulation.library
S3VIRGE.chip
CVision3D.card

[Gav]

 :-?