My medconfig/warp 3d report

[Gav]

 :-?

[mikrucio]

yes. If it does not hurt to have any additional LIBS in there.
If something needs it. It will use it. it wont hurt to have useless ones there.

[zerostress]

Have you tried setting the env vars just as nasty wrote above?
BTW Mediator/Warp3D should be set to No (if I recall correctly it's supposed to be set to Yes only when using Voodoo 4/5), and Warp3D/Mediator/MemSize to 7.
Also, make sure you close every window and turn off your WB backdrop (if any) in order to save some video memory.

[Gav]

Hi
Right just been using my amiga again after a having a break from it and i still aint got ward3d sorted.

Now after looking at Nasty's post above i checked out my "0s3.9/envarchive/powerpc" folder.
In my folder i only have one script file which is named "force" and is set to 1..

Why do i only have one file in there??What do i need to do to correct this??
Thanks in advance.

[Gav]

Duh!!!
I forgot to check show all files lol my bad.

[Gav]

Right well from what i see all is correct so far as i checked through those files above and everything seems fine apart from Nasty's vodoo mem is set to 15?Mine is set to 8..

[darksun9210]

i know this might not be much help, but i was tearing my hair out trying to figure out this and that on my WarpUP Warp3D config. nothing would work. PPC exceptions all over the place.
my install was 3.9, with the version of WarpUP off the 3.9CD, it is the latest version (?apparently?)

got hacked off and installed the version of WarpUP (V4.0) off of my HereticII CD and the version of Warp3D off of there. thinking about it, there was no way they would distribute a game with an unqualified mix of drivers surely?

it worked! version 3 of warp3D and WarpUP v4 running fine.
Heretic2 works,
WipeOut2097 works,
Truereality N64 works,
GLQuake works,
Warp3D demo works,
WarpOS Meter (ppc cpu meter) works...

upgraded warp3d to version 4.2, much better speed. but left WarpUP at version 4. not set to compatable mode during the install...

i've also installed blizzpatch off of aminet that disables the PPC.library on startup, and set memory protected to "yes" using warp prefs.

i have no idea if that'll work for you and your drool worthy setup, but just an idea.... i hope you get it nailed down soon  :-)

[Gav]

Thanks for the reply,i just tried the older version of warpup but again i get the same damn exception message..This is so frustrating...

[Gav]

I have tried this sooo many times that i truly am out of ideas,i have re-installed warpup,warp3d and still no joy...

Do all warp3d drivers work or do you have to use the ones from the mediator cd??
Thanks

[Framiga]

try this:

goto the BPPC Flash memory settings to check to not have waitstates for PPC disabled

then try this powerpc.library

[Mad-Matt]

if the med report is still current, then the error looks as simple as not having any gfx mem address set.

Be sure to be using latest warp3d from elbox site. nommu mode.

with the ppclibemu installed terminator must be 0 and nopatch1

also running through all the settings in med config and it will advise correct values.

[Gav]

@Framiga
I installed that powerpc lib but that has changed nothing,also checked the flash mem and all is fine.

@MadMatt

Here is my current medconfig report.



*** Envarc: variable settings: ***

MMU = No, previous setting: No

NoCache = Yes, previous setting: Yes

Emulation = No, previous setting: No

PatchInt = No, previous setting: No

VoodooMem = 8, previous setting: 8

VoodooInt = Yes, previous setting: Yes

Warp3D = No, previous setting: No

VirgeMem = Not Set, previous setting: Not Set

VirgeInt = Not Set, previous setting: Not Set

Gfxaddr = $200000, previous setting: $200000

Memsize = 7, previous setting: 7

FastEthernet = 0, previous setting: 0

tv.prefs file name = PixelView PlayTV pro, previous setting: PixelView PlayTV pro

Tuner = Not Set, previous setting: Not Set

Background = RED=170 GREEN=170 BLUE=170, previous setting: RED=170 GREEN=170 BLUE=170


*** Mediator System Files versions: ***

pci.library - ver.5.9 (8420 bytes)
PciInfo - ver.1.2 (8088 bytes)
MediatorNET.device - ver.2.6 (5996 bytes)
Voodoo.card - ver.4.18 (15260 bytes)
Virge.card - ver.1.7 (11936 bytes)
Vendors.txt - ver. info N/A (156149 bytes)
MedConfig - ver.1.3 (94013 bytes)

*** Mediator Multimedia CD Files versions: ***

FastEthernet.device - ver.1.7 (6676 bytes)
mixer.library - ver.1.4 (3572 bytes)
fm801.audio - file N/A
FM801 - file N/A
sb128.audio - ver.4.7 (6344 bytes)
SB128 - ver. info N/A (2032 bytes)
SBMixer - ver.1.3 (1928 bytes)
tv.library - ver.1.13 (8224 bytes)
TV - ver.1.3 (1956 bytes)
tv.vhi - file N/A

*** Spider Files versions: ***

poseidon.library - file N/A
spider.device - file N/A
DriveSpeed - file N/A

*** Warp 3D files versions: ***

Warp3D.library - ver.4.2 (67648 bytes)
Warp3DPPC.library - ver.4.2 (101020 bytes)

*** Warp 3D for A3/4000 files versions: ***

W3D_Picasso96.library - file N/A
W3D_Picasso96_PPC.library - file N/A
W3D_AvengerBE.library - file N/A
W3D_AvengerBE_PPC.library - file N/A
W3D_AvengerLE.library - file N/A
W3D_AvengerLE_PPC.library - file N/A

*** MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96MU.library - file N/A
W3D_AvengerBEMU.library - file N/A
W3D_AvengerLEMU.library - file N/A

*** NO_MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96M.library - ver.4.2 (12780 bytes)
W3D_Picasso96M_PPC.library - ver.1.0 (35292 bytes)
W3D_AvengerBEM.library - ver.4.2 (535304 bytes)
W3D_AvengerBEM_PPC.library - ver.4.2 (443516 bytes)
W3D_AvengerLEM.library - ver.4.2 (535388 bytes)
W3D_AvengerLEM_PPC.library - ver.4.2 (411612 bytes)

*** Other files versions: ***

AmigaOS ROM Update - ver.44.26 (127956 bytes)
rtg.library - ver.40.3945 (216548 bytes)
emulation.library - ver.40.389 (39652 bytes)
Picasso96API.library - ver.2.300 (24520 bytes)
ahi.device - ver.5.6 (58416 bytes)
68040.library - ver.43.0 (692 bytes)
68060.library - ver.46.15 (103596 bytes)
warp.library - ver.4.0 (21252 bytes)
ppc.library - ver.0.9 (70148 bytes)


model - 0, gfx - 2, zorro - 1, pcmcia - 1,
serial - 0, ppc - 0, mmu030 - 0, mmulib - 1,
nocache - , emulation - 1, warp3d - , pci - 1.


startup-sequence:

BPPCFix INSTALL >NIL:
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9

If EXISTS C:SquirrelSCSI
    C:SquirrelSCSI
EndIf

Set SCSIUpdate 1
    Set SCSIUpdate 0
EndIf
If EXISTS SYS:Expansion/XSurfIDE
    Set SCSIUpdate 0
EndIf
If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
    Set SCSIUpdate 0
EndIf
If $SCSIUpdate EQ 1
    SetPatch QUIET
Else
    SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf
Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
  Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:
run >NIL: Birdie ?
PciInfo report:


Pci Device 1:
   VendorID: $121a
   VendorName: 3dfx Interactive Inc
   DeviceID: $5
   DeviceName: Voodoo3 All Voodoo3 chips, 3000
   ClassCode: $30000
   RevisionID: $1
   InterruptPin: 1
   SubsystemVendorID: $121a
   SubsystemID: $57
   MemSpace0: $80000000 - $81ffffff
   MemSpace1: $82000000 - $83ffffff
   IOSpace2: $eb6000 - $eb60ff
   RomSpace: $84000000 - $8400ffff

Pci Device 2:
   VendorID: $1274
   VendorName: Ensoniq
   DeviceID: $1371
   DeviceName: ES1371 AudioPCI
   ClassCode: $40100
   RevisionID: $6
   InterruptPin: 3
   SubsystemVendorID: $1274
   SubsystemID: $1371
   IOSpace0: $eb6400 - $eb643f

Pci Device 3:
   VendorID: $109e
   VendorName: Brooktree Corporation
   DeviceID: $36e
   DeviceName: Bt878 MediaStream Controller
   ClassCode: $40000
   RevisionID: $11
   InterruptPin: 4
   SubsystemVendorID: $70
   SubsystemID: $13eb
   MemSpace0: $84010000 - $84010fff

Pci Device 4:
   VendorID: $109e
   VendorName: Brooktree Corporation
   DeviceID: $878
   DeviceName: Bt878 Video Capture (Audio Section)
   ClassCode: $48000
   RevisionID: $11
   InterruptPin: 4
   SubsystemVendorID: $70
   SubsystemID: $13eb
   MemSpace0: $84011000 - $84011fff

Pci Device 5:
   VendorID: $10ec
   VendorName: Realtek Semiconductor
   DeviceID: $8139
   DeviceName: RT8139A/B/C Fast Ethernet Adapter
   ClassCode: $20000
   RevisionID: $10
   InterruptPin: 1
   SubsystemVendorID: $10ec
   SubsystemID: $8139
   IOSpace0: $eb6800 - $eb68ff
   MemSpace1: $84012000 - $840120ff


ShowConfig report:

PROCESSOR:    CPU 68060/68060fpu/68060mmu
CUSTOM CHIPS:    AA PAL Alice (id=$0023), AA Lisa (id=$00F8)
VERS:    Kickstart version 40.68, Exec version 40.10, Disk version 45.2
RAM:    Node type $A, Attributes $505 (FAST), at $60000000-$6BF7FFFF (191.5 meg)
    Node type $A, Attributes $703 (CHIP), at $1000-$1FFFFF (~2.0 meg)
BOARDS:
 Board (Index Information Ltd):   Prod=2206/40($89E/$28) (@$EA0000 128K)
 Board (Index Information Ltd):   Prod=2206/168($89E/$A8) (@$200000 8meg)
 Board + ROM (HD?) (phase 5):   Prod=8512/110($2140/$6E) (@$F00C34 128K)
 

[Framiga]

what this?

C:LoadWB
EndCLI >NIL:
run >NIL: Birdie ?

[Gav]

Birdie prefs???It seems to work alright lol??

[Bamiga2002]

Did you delete all Shogo-related files from ENVARC: and ENV: as i explained? Then reboot and run Shogo launcher again. Does it work then?

[Gav]

Yeah did erase the files that you mentioned but i get the same error on shogo aswell as the gears demo.

With the 68k i just get a empty window and on the ppc version i just get an exception error.

How much GFX memory should i have for a voodoo3??at the moment without a wallpaper image i have 1,929,288...Is that about right??Seems small??