1200 Ethernet

[sy278]

Hi Guys,

I have seen it is possible to hook the 1200 up to ethernet to gain access to the web.

I just need a few pointers, if you could be so kind:

Am I right in thinking that the PCMCIA card needs to be 16 bit, and not 32 bit?

Also if anyone could advise a card and where to get the driver for it it would be much appreciated. As yet though I have not decided on wired or wireless, so advice on both would be great.


Cheers Guys!   :-)

[amigakit]

We have the EasyNet 1200 cards in stock:

http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=116

Cards are 16-bit and supplied with EasyNet

[Piru]

@sy278

For DIY solutions, look into:

http://aminet.net/package/driver/net/cnetdevice
http://aminet.net/package/driver/net/3c589
http://aminet.net/package/driver/net/prism2

[Jiffy]

The PCMCIA-card should indeed be 16 bit and not a 32 bit one. Many regular PCMCIA-networkcards can be used, just check if they are compatible with the two drivers on Aminet that Piru mentions.

I use a 3C589 (3Com) myself. Works great, although don't expect higher speeds than about 250-350 KB/s.

[Hodgkinson]

I use a 3C589 (3Com) myself.

So do I  :crazy:

For file transfer, this cards driver, SMBFS, and AmiTCP all running together works quite well.

Hodgkinson.