Blizz 1230 SCSI kit, how i can see thar damn 1230scsi.device?

[Chain]

I finally decided to order scsi kit from amigakit.
today its arrived (veryfast)

so ive installed one 16mb simm just for testing, atach scsi ribbon, plug whole sandwich together and intall it into my 1200.

and now now i can see/mount/whatever cdrom or zip drive?
cd and zip is 100% working (im using it with A2000+oktagon, so its properly daisychained and terminated.

on diskette from amigakit its only bunch of unusable tools or what? hdtoolsbox (tooltype askdevice) cant see 1230scsi.device too

what i can try now?

(added16meg sim is of course visible and usable (32+16=48meg fast)


 :evil:  :madashell:  :boohoo:

[Chain]

os 3.5 BB2

 setpatch dint patch 1230scsi.device too

[Chain]

6hours of testing and still sh*t

[Tahoe]

You do see the extra 16MB memory? Sure you have the cable right way around? Terminated the bus properly?

[Chain]

of course, there is only one cable with red marked pin one.

i cant see 1230scsi device tihout thar damn cable.

so its only simm holder, for 100 euro, FU*K

 :madashell:

[Tahoe]

I had trouble getting one to work too; got it fixed eventualy after hours of fiddling. Pin 1 is marked on the cable; but not on the card. The red wire is on the simm holder side, if it's not already there.
Try removing the SCSI board and clean the contacts on both the Blizzard and the SCSI card. This eventually worked for me, probably just a dirty contact (though the effect was very different; my Amiga wouldn't boot, just a black screen)

[Chain]

my amiga is working fine, i can see additional 16meg simm on scsi kit

i know, pin 1 is near simm socket, its installer step by step like in manual


strange thing

i see only carddisk.device and scsi.device in hdtoolbox


tested with three blizzards (phase5, dce, old, new)

[tonyvdb]

Some SCSI drives will not work with the Amiga properly you should try a different drive. You MUST have a SCSI active terminator on the SCSI cable as well.

[Chain]

its not funny u know

i just cant see 1230scsi.device in hdtoolbox

[Flashlab]

You have to set the scsi device in the Tooltypes of HDToolbox if I recall correctly. Then it will use that device driver.

[tonyvdb]

Chain wrote:
its not funny u know

I am not laughing, I understand that setting up a SCSI drive can be a pain.

Do you have the Drive set to the right device # make sure it is not the same as any other SCSI device and not #7 as that is reserved for the controler.
Do you hear the drive spin up when you power it up?

[Chain]

LOL, there is no problems with drives!!!

now tried under 3.1, its the same, THERE IS NO 1230scsi.device

drives are working fine with other miggys

NO DRIVES CONNECTED, still cant see scsi device in any scsi inquiry tool


>version scsi.device
scsi.device 37.64
>version 1230scsi.device
object not found

[Flashlab]

Maybe your scsi kit is busted! Or try a rom update?

[patrik]

@Chain:

What does a "version 1230scsi.device" in a shell say?


/Patrik

[Chain]

as i wrote


>version scsi.device
scsi.device 37.64
>version 1230scsi.device
object not found