Welcome, Guest. Please login or register.

Author Topic: Blitz Basic Issue and an ACE question  (Read 1590 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline DarkShadowTopic starter

  • Newbie
  • *
  • Join Date: Dec 2004
  • Posts: 10
    • Show only replies by DarkShadow
    • http://www.adaworld.com
Blitz Basic Issue and an ACE question
« on: January 04, 2005, 10:14:44 PM »
Ok, I've been looking at Blitz Basic I downloaded 2.3 unpacked it, ran the install file.  Open the IDE, opened a bb2 sample.  Hit the "Compile & Run" menu option.  And poof..it didn't run. ;-).

I assumed running the Install file would make it so I could compile at least the sample files ;-).  So then my question is for those of you running Blitz Basic on UAE or WinUAE (WinUAE in my case).  After running the Install file, what else do I need to do to get it to compile it's own samples?

I have WinUAE Emulating a 68040 Amiga Running Kickstart 3.1 Amiga OS 3.1 I have blitz basic (amiblitz actually) installed in my emulated hard drive here called Applications

Hence Applications:AmiBlitz2  is where everything resides.  

1. Should I use a different foldername than AmiBlitz2?

2. 2 things were added to my user-startup when I did the install.  Is that normal ?
 assign >NIL: Blitz2: "Applications:Amiblitz2"
 assign >NIL: BlitzLibs: "Applications:Amiblitz2/Blitzlibs"

3. Is there a place in the IDE (the editor that has the compile menu in it :-).  to add paths where it can look for libraries or others?


For ACE.  That too I installed to the same harddrive on the same emulator and followed the instructions in the install file (added paths and assigns etc). I try to run AIDE (I have the last version the one that went OpenSource).  I get an error running AIDE, the following message is given to me: "Mrt.Library not opened"  So what's my problem...is it that I'm running the emulator WinUAE, is it the install instructions that are faulty?  anyone here managed to make ACE or AmiBlitz work?

Thank you all, I can't wait to get started, so if you got a sec, answer me soon?  while I still got hair on head ?  lol

 

Offline Merc

  • Sr. Member
  • ****
  • Join Date: Apr 2002
  • Posts: 312
    • Show only replies by Merc
    • http://chebucto.ns.ca/~ah210/Profile.html
Re: Blitz Basic Issue and an ACE question
« Reply #1 on: January 04, 2005, 11:01:52 PM »
Hmm, which example did you try to compile and run?  There shouldn't be anything left to set up, those two assigns are normal, and everything else should just work :)  As for specifying libraries etc, you can do that under the compile options menu, I think.  It's been a while since I used AmiBlitz or Blitz period so I'm a bit rusty..  been meaning to install it under WinUAE so maybe I'll give it a try today.
 

Offline DarkShadowTopic starter

  • Newbie
  • *
  • Join Date: Dec 2004
  • Posts: 10
    • Show only replies by DarkShadow
    • http://www.adaworld.com
Re: Blitz Basic Issue and an ACE question
« Reply #2 on: January 05, 2005, 12:00:33 AM »
Well, I've tried most of the bb2 files in the Examples folder.

like I said I'm emulating A4000 with kickstart 3.1 and workbench of the same version.  64 megs of memory. AGA graphics. NTSC standard.  If that's of any help :-).  should I be using an older version of kickstart and workbench?

 

Offline ivibozic

  • Jr. Member
  • **
  • Join Date: Jan 2005
  • Posts: 57
    • Show only replies by ivibozic
Re: Blitz Basic Issue and an ACE question
« Reply #3 on: January 16, 2005, 11:14:31 PM »
Quote

DarkShadow wrote:
Ok, I've been looking at Blitz Basic I downloaded 2.3 unpacked it, ran the install file.  Open the IDE, opened a bb2 sample.  Hit the "Compile & Run" menu option.  And poof..it didn't run. ;-).

I assumed running the Install file would make it so I could compile at least the sample files ;-).  So then my question is for those of you running Blitz Basic on UAE or WinUAE (WinUAE in my case).  After running the Install file, what else do I need to do to get it to compile it's own samples?

I have WinUAE Emulating a 68040 Amiga Running Kickstart 3.1 Amiga OS 3.1 I have blitz basic (amiblitz actually) installed in my emulated hard drive here called Applications

(cut)

For ACE.  That too I installed to the same harddrive on the same emulator and followed the instructions in the install file (added paths and assigns etc). I try to run AIDE (I have the last version the one that went OpenSource).  I get an error running AIDE, the following message is given to me: "Mrt.Library not opened"  So what's my problem...is it that I'm running the emulator WinUAE, is it the install instructions that are faulty?  anyone here managed to make ACE or AmiBlitz work?

Thank you all, I can't wait to get started, so if you got a sec, answer me soon?  while I still got hair on head ?  lol



I have a PC and have succeded in installing and running WinUAE only once, and that was a few years ago.. IMHO you're lucky getting it up and running any how. For a man's honet point of view I'd say that the old crappy {bleep} is just f* died. About time. Damn {bleep}.

--(Waiting for the new A's)

Regards,
-- Ive

** "Livin' la vida loca."