Warp3d ramlib error ppc task error???????help!!

[Doraemon]

I have a similar problem.
My setup is a blizzardppc 603e+/200 060/50, bvision, z4, tocatta, etc
I have a clean install of 3.9 bb2, last w3d and warpos.

The problem is with warp3d stuff like planet potion. It runs only a few seconds and then freezes without a error message.

Any idea?

I touched all the warpos env-vars, tryed different memory velocity, etc...

Its a rev0 is that a problem?

A lot of thanks

(Sorry for my bad english)

[Doraemon]

My system only boot if I have the ram speed at 70ns.
I tryed that suggested tools without good luck.
I discovered that I can run gears 68k in a window and its stable. The ppc version crashes the system in a few seconds.
I have installed the software versions of powerup.amigaworld.de

Help please

[Doraemon]

I have all the soft of that web installed.

Its not my first ppc, but thats a new one and I never had problems with a ppc

[Doraemon]

I discovered that my problem is not with W3d.
I have problems with all the warpos things that uses the bvision (in 2d, or in 3d)
The warp3d demos in aga runs fine, but in the graphic card crashes.

MynCgx4prefs are
Supergels 1
HiresCRSR 1
usesemaphores 1
All the other vars to 0

My Warpos prefs are:
memory protection 0
no ppc 0
early term 0
Terminator 2
Hide warning 1
no patch 0
Always use videoadress
Hex:E0000000
No debugging
Segment info 1

Im using the original bppcfix but I tyed too blizzckik with the bppcfix without luck.

I obtained a few seconds more of w3d run using stackattack.

Anyone can see something wrong ?

[Doraemon]

How can I check if thats the correct videoadress of my bvision ?
Thx

[Doraemon]

Im using your settings doctorq and I have the same problem

[Doraemon]

Yes, I have
68040.library 46.5
68060.library 46.7
Warpup V5.1
Cgxv42_rc6 <- I found a mistake!!!!!!

Were can I download the last (doctorq said that exist a 43.4_rc6)? vgr.com its dead and powerup.amigaworld.de doesn't have it.

The settings of the ppc bios are
Ram at 70ns

System:
No maprom
No 31khz screen
Superscalar ON
BranchCache ON
WriteBuffer ON

I have 2x128 mb simms that I bougth at amigakit. Amigakit says that simms are at 60 ns but it doesnt have any inscription about velocity and if I put it to 60 doesnt boot.

Ahh, I tryed some diferent ppc flash that i fount in grex.amigaworld.de but seems thats especifically for grex and the bvision doesn't work with it. Only works fine with the version on powerup.amigaworld.de

Any ideas?

[Doraemon]

No, I don't user FORCE, you recomend it?

Now I go to make a exam (SHIT!) when I return to home I will test another time the grex flashes and I check my system with a antivirus program.

[Doraemon]

Its enought that when my amiga its turned on, I get in +5v pins 4.7V ?
Its a adapted Atx p4 power supply of 400W.
It might be a problem?
Im using the power conecter of floppy trick.

[Doraemon]

My miggy its powered by the at conector at z4 and the floppy power conector.
Well, I go to buy a server power supply

[Doraemon]

Thx thx and more thx.
Im really happy.
I bought a server power supply and a atx2at adaptor.
Now it runs like a charm