Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Indivision config tool error  (Read 4755 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Indivision config tool error
« on: March 07, 2009, 02:45:47 PM »
I've downloaded the latest Indivision AGA config tool
V1.1 + Indivision flash core v1.4 from the official Indivision
Computers web-site, and installed it
on my A1200 with V3.1 ROMs and V3.1 WB.
According to the readme file I've flashed the v1.4 file
first with the old (v1.0) version of the flash tool succesfully.
But after a reset/cold boot the new v1.1 config tool won't run.
All I get is an empty file requester with 2 "OKAY!" buttons.
When I press either one of the 2 buttons, nothing happens.
The old v0.9 config tool works fine though, except for the
screen position and screen timing buttons, they don't react at all.
Is there some bug in the v0.9 and the new v1.1 config tool?
Has anybody else encountered the same problem?
 :-?
Logged
 

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Re: Indivision config tool error
« Reply #1 on: March 08, 2009, 02:36:49 PM »
My Indivision is working perfectly too. Very strange indeed... :roll:
The software must be very buggy.
Logged
 

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Re: Indivision config tool error
« Reply #2 on: March 08, 2009, 04:38:05 PM »
I did flash a second time after the first attempt to start the new config tool... But with no result.  :-(
Logged
 

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Re: Indivision config tool error
« Reply #3 on: March 10, 2009, 03:21:53 PM »
My problem still exist after several removals
and re-seatings of the Indivision.
v0.9 of the config tool runs and reqognizes the
Indivision hardware, but if I run v1.1, I still get
the empty requester with 2 "OKAY!" buttons.
I also noticed a strange thing with the Indivision:
The socket is slightly damaged, and there is one pin missing... :-o
This is how I received it from Amigakit. I did noticed
it before when installing the card for the first time,
but it didn't bother me because the card was working
great.
Maybe this has something to do with not running the
config tool v1.1?
But why is it running v0.9 then?
Or is it supose to be missing one pin from the socket???
 :-?
Logged
 

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Re: Indivision config tool error
« Reply #4 on: March 11, 2009, 04:58:22 PM »
I'm sure my problem with the card is hardware related because of the missing pin. I've contacted Amigakit and asked how we can solve this problem.
Let's wait and see...
Logged
 

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Re: Indivision config tool error
« Reply #5 on: March 12, 2009, 09:47:28 PM »
I've contacted Amigakit and we agreed to send
the Indivision back to Amigakit for analyze.
The card had a crystal clear picture on my 17" CRT
monitor, but because of the missing pin on the
Lisa socket, I couldn't use the config tool to
configure the card.
I have faith that Amigakit comes with a good
solution.
I let you guys know how it expires.
Logged
 

Offline AmiDudeTopic starter

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 903
    • Show all replies
Re: Indivision config tool error
« Reply #6 on: April 10, 2009, 10:02:33 PM »
Amigakit will send me a new replacement Indivision
when they get the new batch in stock.
 :-)
Logged
 
Pages: [1]   Go Up
« previous next »