Amiga 3000 Tower Kit!

[DeQuevedo]

Hi dudes

I have been given an Amiga 3000 tower kit! :-) I mean, 2 3000 T in spare parts.

I need as much info as I can get.Where to start first?

and, who of youu have a 3000T woking? I may need to now where are socketedd some IC i have laying here...

Its a bit big this poject, but heyhey, If I can manage this to gt it woking would be great

Best Regards and Thank you in advance for your help

-DeQ

[DeQuevedo]

C´mon guys!

[PaSha]

Hi.
Have a look at http://amiga.resource.cx/photos/photo.pl?id=a3000t

You'll find a VERY high res pic of the A3000T motherboard there, 5432x4092 pixels. That should give you quite a few hints as to where the chips go ;-)

Anyways, best of luck with your build-your-own A3000T kits :-D

regards,
Paul

[mgerics]

Cool. So, what gozinta one of those? Desktop parts?
I have an A3000 Desktop that blew the power supply. Need parts? Good mobo, and it also has a WarpEngine '040, but I don't have the jumper line the manual says it needs to make SCSI work on the A3000- I was just using the A3000 on-baord SCSI and enjoying the faster processor.

[voxel]

Hi DeQ :-)

I have one of these big box Amiga here, so feel free to ask if you get problems :-)

[DeQuevedo]

Hi Voxel! Thanks for your support

First question.
In the mobbo, the IC marked as U103, in all the photos i have found is a free socket, but i my mobbo it has a 74S08N (inverter IIRC),and some other photos, the back of the mobbo has one wire from the upgrade CPU socket pins to somewhere in the mobbo. Mine doesnt!

What up with this?¿

Best Regards

PD:Since I have not agnus from 3k im considering put in the sockeat an A500 agnus. Any problem on this¿?