Graphics card compatibility X1000

[SteveH_UK]

I decided to upgrade the graphic card in my X1000 from a Radeon HD, so have bought a Radeon RX 560 (a Biostar VA5615RF41).
But when I tried to install it, I couldn't find anywhere on the card to plug in the PCI power cable.
My old card had a black plastic socket where the 6-pin cable plugged in (see attached photo; socket on the right), but this socket is completely missing on the RX card.
Have I simply bought the wrong form factor, or is there an adaptor available? Any advice would be appreciated!
Steve

[F0LLETT]

Means your new card is not that powerful and does not require the extra power. It will run without it.

[SteveH_UK]

Thanks Chris.
When I fitted the card, I'd assumed the reason my monitor remained blank was lack of power to the card, but I can now see the card's fans work, so the card is definitely receiving power.
Now I need to work out why nothing shows on the monitor ... I'll check serial output in the morning!
Cheers,
Steve

[nbache]

@SteveH_UK

Do you have the RadeonRX.chip in Kickstart and referenced in your KickLayout?

Best regards,

Niels

[SteveH_UK]

Hi Niels,
Yes, I have the RadeonRX.chip in Kickstart and there's a corresponding line in the KickLayout - but as my boot process doesn't get to the CFE boot screen, I am guessing something else is going on.
Hopefully, serial output will shed light on what that is ...
Steve