Welcome, Guest. Please login or register.

Author Topic: Set the System Time with Genesis  (Read 1798 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline duesiTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show only replies by duesi
Set the System Time with Genesis
« on: January 05, 2003, 11:12:41 AM »
I've just encountered this little Problem
When i use an ntp server to get the time while going
online.. Genesis error ntp.metas.ch/daytime
is not found ! In MIAMI this works fine..
Please help because i like to use Genesis only..
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler
 

Offline Castellen

Re: Set the System Time with Genesis
« Reply #1 on: January 05, 2003, 12:16:20 PM »
I use Miami myself, so can't suggest much other than reading the AmiTCP/Genesis
docs to make sure you're entering time update settings correctly.

An alternative is to use a time sychroniser like FACTS from Aminet.
You can set it to run (as a hidden commodity) when Genesis goes online.

If you have a system clock speed problem caused by a GFX card like I do, you can
set FACTS to auto-update every set number of minutes.
 

Offline duesiTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show only replies by duesi
Re: Set the System Time with Genesis
« Reply #2 on: January 06, 2003, 05:34:49 PM »
I checked out the Genesis Manual
But there is no description how to enter the time
server...
In MIAMI I use ntp.metas.ch and it works...
Any idea how to enter the server in Genesis ?
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler
 

Offline odin

  • Colonization had Galleons
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 6796
    • Show only replies by odin
Re: Set the System Time with Genesis
« Reply #3 on: January 06, 2003, 05:38:00 PM »
Tried entering the actual IP adress? For that .ch server 193.5.216.14.

Offline duesiTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show only replies by duesi
Re: Set the System Time with Genesis
« Reply #4 on: January 06, 2003, 05:42:27 PM »
Yes I tried....didn't work also
DNS config is anyway OK I think
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler