Amiga OS 3.2 on Amiga 1000

[Uityyy]

Does anyone here have experience installing Amiga OS 3.2 on an Amiga 1000? The installation instructions say it is supported and that a 3.x Kickstart ROM is required, but the Amiga 1000 uses Kickstart floppies in place of ROMs, and the installation instructions don't specify what to write as a Kisktart floppy.

[orange]

IIRC, Amiga 1000 has only 256K RAM for kickstart, KS3+ are 512K ?
I'd make/buy some hardware adapter or accelerator that can take KS3+
Loading it on every (cold) boot is tedious, perhaps even from hdd.

[kolla]

Yes, for exampel Parceiro II.
(though I use a pistorm in mine)

[Uityyy]

I actively prefer loading Kickstarts on every boot the Amiga 1000 way. It's slower, but it allows me to switch between different systems rather handily.

[orange]

IIRC, some hardware solutions also include kickstart switchers.

[kolla]

I actively prefer loading Kickstarts on every boot the Amiga 1000 way. It's slower, but it allows me to switch between different systems rather handily.

Ok, so you want a 3.2 kickstart floppy. The WOM of the A1000 where kickstart normally is loaded to, is just 256kB, so you will need fast ram and softkick program of some sort.

I would have tried some of these…

https://aminet.net/package/util/misc/ykick

https://aminet.net/package/util/misc/KickTools

https://aminet.net/package/util/sys/twinkick

[Bluewizard]

I added a Pi-Storm to mine and the Pi-Storm can then boot whatever Kickstart you want.

Biggest problem I have is I still only have 512k of Chip RAM.  .   No rejuvenator in mine sadly.

[kolla]

@Bluewizard

Same here, it’s a shame that there’s no straight forward solution for adding more chipram on PAL A1000s.