Where to put green cable?

[phipslk]

okay, I admit, I opened the case to make a backup of the sd card. May be paranoid, but I prefere to have a backup.
Sadly the green cable went off from the GPIO board and I don't know, where to put it back to. In a video I saw, it was the second pin on the upper row. Is that right?

[SkulleateR]

see attachment

[amyren]

That is correct. For that 13 pin Expander (CN105) Green goes to pin 2, yellow = pin 7, blue = pin 8
You can see that the pin no 13 is labeled (printed on the board) so that you know that pin no 1 starts on the opposite side of the header.

[F0LLETT]

That is correct. For that 13 pin Expander (CN105) Green goes to pin 2, yellow = pin 7, blue = pin 8
You can see that the pin no 13 is labeled (printed on the board) so that you know that pin no 1 starts on the opposite side of the header.

All cable colours are random. So I would not quote colours. Middle is always pin 2 (GND), as thats the way I have delibrately soldered every single one.