Welcome, Guest. Please login or register.

Author Topic: MiamiDX on A1200  (Read 5064 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 219
  • Country: us
  • Gender: Male
    • Show only replies by bradhansen1
MiamiDX on A1200
« on: July 25, 2024, 10:47:56 AM »
Hello All, I am trying to setup my PiStorm32 lite on my A1200 to connect to Wifi using
the Pi's wifi configuration. I am trying to run MiamiDX to do this. I noticed a number of
folks are using this software. However after I install the MiamiDX Software, which sets up
ok. Then I try launch the it, I get an error that says "Unable to open MUI Module." I have
added the 2 MUI modules to the install without issue, but the software can't seem to find
them. Any help that I can get on this would be much appreciated.
Regards,
Brad Hansen
 

Offline Munchkin

Re: MiamiDX on A1200
« Reply #1 on: July 25, 2024, 11:29:07 AM »
Which MUI modules is it asking for and where did you put them?
 

Offline F0LLETT

  • Amigakit / A-EON Support
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 981
  • Country: gb
  • Thanked: 81 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: MiamiDX on A1200
« Reply #2 on: July 25, 2024, 12:21:11 PM »
Hello All, I am trying to setup my PiStorm32 lite on my A1200 to connect to Wifi using
the Pi's wifi configuration. I am trying to run MiamiDX to do this. I noticed a number of
folks are using this software. However after I install the MiamiDX Software, which sets up
ok. Then I try launch the it, I get an error that says "Unable to open MUI Module." I have
added the 2 MUI modules to the install without issue, but the software can't seem to find
them. Any help that I can get on this would be much appreciated.
Regards,
Brad Hansen

Miami DX and Piwifi guide.

Just follow this quide exactly. It works perfect using this.
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 219
  • Country: us
  • Gender: Male
    • Show only replies by bradhansen1
Re: MiamiDX on A1200
« Reply #3 on: July 25, 2024, 05:00:34 PM »
Hi, thanks for the help, the Install is not asking for any specific module it just has MUI first checked and then a
blue dot and you just agree to both. I put them in the Miami folder in the Internet folder.
Thanks,
Brad Hansen
 

Offline F0LLETT

  • Amigakit / A-EON Support
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 981
  • Country: gb
  • Thanked: 81 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: MiamiDX on A1200
« Reply #4 on: July 25, 2024, 10:27:34 PM »
Hi, thanks for the help, the Install is not asking for any specific module it just has MUI first checked and then a
blue dot and you just agree to both. I put them in the Miami folder in the Internet folder.
Thanks,
Brad Hansen

You put MUI drawer in install drawer from what I remember, then run installer.
It should then allow you to proceed.
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline AndyFC

Re: MiamiDX on A1200
« Reply #5 on: July 25, 2024, 11:41:43 PM »
@bradhansen1 is it a repeat of the problem on this thread, or something different?
https://forum.amiga.org/index.php?topic=71221.0

I have just tried installing MiamiDX on a clean installation of OS 3.2.2.1. I first unarchived MiamiDx10c-main.lha to RAM: and then the Miamidx-10c-MUI.lha archive to the same location which placed a MUI folder in the installation directory.

I've tried a few things and you MUST have all the files and MUI installed for Miami to install successfully, otherwise the installer aborts. I've tried really hard to break the installation routine but it covers all the main opportunities for missing files.

Do you use SnoopDOS? Run it before you try and start Miami and it will hopefully tell you which files are missing

How are you unarchiving the files? It's currently the only thing I can think that might be different. I'm unarchiving the files using the CLI:

lha e <archive name> RAM:


« Last Edit: July 26, 2024, 08:55:38 AM by AndyFC »
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline Pyromania

  • Sent from my Quantum Computer
  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1829
  • Country: 00
  • Thanked: 6 times
    • Show only replies by Pyromania
    • http://www.discreetfx.com
Re: MiamiDX on A1200
« Reply #6 on: July 26, 2024, 07:26:07 AM »
Why don’t you just buy Roadshow?

http://roadshow.apc-tcp.de/index-en.php
 

Offline F0LLETT

  • Amigakit / A-EON Support
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 981
  • Country: gb
  • Thanked: 81 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: MiamiDX on A1200
« Reply #7 on: July 26, 2024, 09:51:17 AM »
Why don’t you just buy Roadshow?

http://roadshow.apc-tcp.de/index-en.php

Or EasyNET. Beta is being tested at moment.
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 219
  • Country: us
  • Gender: Male
    • Show only replies by bradhansen1
Re: MiamiDX on A1200
« Reply #8 on: July 29, 2024, 04:28:56 PM »
Hi, send me the money and I will be happy to purchase it. Wait, no I won't. I down loaded the demo
and just couldn't figure it out. I also own a copy of EasyNetPro, waiting for the update. I do now have
MiamiDX working. Appreciate all the help.
Brad Hansen