Welcome, Guest. Please login or register.

Author Topic: KVM switch?  (Read 792 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline kirk_mTopic starter

KVM switch?
« on: October 11, 2017, 03:58:34 PM »
Is there a KVM switch that will work with Amiga computers?  I can imagine the old ports will prove to be a problem with any modern solution.
-/- A500 & ACA500 & ACA1233n -/- A500 Tower & VAMPiRE II 500+ -/- A2000 & BLiZZARD 2060 -/- A3000 & CYBERSTORM MKII 040 -/- A1200 & BLiZZARD 1230 MK IV -/- A1200 & BLiZZARD 1260 -/- A4000 & 3640 -/-
 

Offline giZmo350

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 2064
  • Country: 00
  • Thanked: 29 times
  • Gulfport, Miss
    • Show only replies by giZmo350
Re: KVM switch?
« Reply #1 on: October 11, 2017, 04:11:12 PM »
I use the Ultra GammaView 2050 2 port KVM everyday between my A1200 and MacMini. However, I only use the video portion of the switch (if you have an Indivision S/D in your Amiga). I use a mixer for audio between the two (because the Amiga audio output is much higher than the MacMini) and still just use the DB9 mouse - but a USB mouse connected simultaneously with an Amiga mouse works well too - even wireless USB mice (if you have a USB interface in your Amiga). Here's a link FYI....  :laugh1:

https://www.amazon.com/Video-audio-Switch-Ports-Qty/dp/B003S6EFJ0
« Last Edit: October 11, 2017, 04:22:00 PM by gizmo350 »
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
 
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
 
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5

Surfing The Web With AMIGA Is Fun Again!