Buddha + Doobrey + Compact Flash not working

[guest6117]

I have an original Buddha card in an A4000 and I'm trying to use Compact Flash cards with it. I downloaded the patches from Doobrey and applied them, but the Buddha still does not recognize the CF cards.

I tried two different CF-IDE adapters and two different cards. Can anyone tell me the expected CRCs for the patched ROMs? I have:

MiniPro (CRC32?): 0x0041 D1C1
SHA1: 28e8b0d1136ca4f796e0d4a6e3bb2f2206692541
MD5: d664bbb8c2d8b6616a72d2f8ccdcf9cd

Patched version string says 103.19 (19.01.2010) which seems to match the date in the readme. I also patched the BuddhaIDE app.

When I check with the FindDevices prog it can't see anything attached. Tried both IDE ports too. It can see an ATAPI DVD-RW if I plug that in.

[pyrre]

I have an original Buddha card in an A4000 and I'm trying to use Compact Flash cards with it. I downloaded the patches from Doobrey and applied them, but the Buddha still does not recognize the CF cards.

I tried two different CF-IDE adapters and two different cards. Can anyone tell me the expected CRCs for the patched ROMs? I have:

MiniPro (CRC32?): 0x0041 D1C1
SHA1: 28e8b0d1136ca4f796e0d4a6e3bb2f2206692541
MD5: d664bbb8c2d8b6616a72d2f8ccdcf9cd

Patched version string says 103.19 (19.01.2010) which seems to match the date in the readme. I also patched the BuddhaIDE app.

When I check with the FindDevices prog it can't see anything attached. Tried both IDE ports too. It can see an ATAPI DVD-RW if I plug that in.

I have a buddha myself. and they seem WERY picky about cf cards.
You need a trueide to make cf cards work with buddha

[guest6117]

Shouldn't it just work with the patched ROM though? I thought that was the point of patching it, to make compact flash cards work.

Maybe I should try one of those Transcend ones that show up as fixed disks.

[kirk_m]

Someone on Amibay recently posted that Buddha requires an "Industrial CF Card," which I am pretty sure means it has the flag that reports it as a fixed drive.

[pyrre]

Shouldn't it just work with the patched ROM though? I thought that was the point of patching it, to make compact flash cards work.

Maybe I should try one of those Transcend ones that show up as fixed disks.

I have tried a lot of cf cards on my buddha. none seemed to work, none of them got recognized by the controller. i have patched and upgraded everything possible.
I even tried using my A1200 to prep an setup os 2.1 on the cf cards.
they jut did not get recognized.... no boot, nothing....

purchase trueide and all works as if nothing has happened...

my thread about same topic:
http://www.amiga.org/forums/showthread.php?t=71070

[giZmo350]

I too have a Buddha Flash and TrueIDE. The only CF card that I've been able to get recognized is a 2GB Transcend. I've tried about 5 different brands of CF cards to no avail (TrueIDE was supposed be able to use about any CF card). I recently bought a couple Transcend 4GB cards and again, not recognized. I have NOT flashed the card since getting it from AmigaKit. So, I'll try that and the patches in Pyrre's original thread http://www.amiga.org/forums/showthread.php?t=71070 as it seemed to work for him?

Pyrre, I thought you stated that the patches worked for you here......
http://www.amiga.org/forums/showpost.php?p=809915&postcount=17

Er wait.... Pyrre, no patching worked for you?  After getting the TreuIDE did you use HDToolBox or HDInstTools? I may have never tried HDInstTools - who knows. Geeze, that thread is almost a year old and I missed it. Anyhoo, thx Pyrre, Cosmos & PanterHZ.

[pyrre]

I too have a Buddha Flash and TrueIDE. The only CF card that I've been able to get recognized is a 2GB Transcend. I've tried about 5 different brands of CF cards to no avail (TrueIDE was supposed be able to use about any CF card). I recently bought a couple Transcend 4GB cards and again, not recognized. I have NOT flashed the card since getting it from AmigaKit. So, I'll try that and the patches in Pyrre's original thread http://www.amiga.org/forums/showthread.php?t=71070 as it seemed to work for him?

Pyrre, I thought you stated that the patches worked for you here......
http://www.amiga.org/forums/showpost.php?p=809915&postcount=17

Er wait.... Pyrre, no patching worked for you?  After getting the TreuIDE did you use HDToolBox or HDInstTools? I may have never tried HDInstTools - who knows. Geeze, that thread is almost a year old and I missed it. Anyhoo, thx Pyrre, Cosmos & PanterHZ.

HDToolbox is my preferred program for setting up hdd's.
The patching worked well with spinning hdds. transfer speeds wen up slightly. I did get around to detect CFs inserted, but i never got around to use them. if i got them setup and prepped. they disappeared when rebooting to format them. Or in some way was messed up, rendering them unusable.
But when i got the trueide it worked like it never had made any problems.
I use SanDisk Ultra CFs. The ones with a gray and red sticker. I stick with 4GB cards, two of them.

[gary2000]

My original buddha works fine with a cheap Chinese adapter with bracket and a sandisk ultra II 4GB.

[pyrre]

My original buddha works fine with a cheap Chinese adapter with bracket and a sandisk ultra II 4GB.

lucky you

I had severe problems with that. have not tried ultra II
only my 4gig Ultras.
After patching they were detected, with faulty size though.
But i never got past the stage of setting them up in hdtoolbox.
after a reboot (cold or hot did not matter) the drive(s) were gone and unable to format...

Instead of arguing with the girl, i got my hands on a trueide, and i can recommend it.

[guest6117]

I have ordered a couple of new CF cards that hopefully are fixed disk mode. The two I have are Transcend but I think they are fake.

[pyrre]

I have ordered a couple of new CF cards that hopefully are fixed disk mode. The two I have are Transcend but I think they are fake.

Hope it solves your problem.
let us know how it goes

[guest6117]

I got a genuine Transcend CF220I 2GB card, which is set to fixed disk mode. The Amiga won't boot with it installed. The activity light flashes a bit, comes on permanently and the machine doesn't get past the grey boot screen.

I have one more non-Transcend one coming too, but this is really frustrating now.

[guest6117]

The 4GB card doesn't work either.

[pyrre]

have you considered the trueide?

[guest6117]

I suppose I could try it, but I wanted the card to be externally accessible so I can transfer data easily.

Has anyone actually had a Buddha working%&$#?@!%&$#?@!%&$#?@!8203; with a CF card?