Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 2 3 [4]   Go Down

Author Topic: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released  (Read 8605 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline kolla

Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #44 from previous page: January 19, 2017, 12:36:20 PM »
Quote from: pVC;820058
and has been asking comments how MUI4/5 performs on real systems.


That one is easy - it doesn't.
Logged
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
A600/A6095
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM440 and Mac minis with MorphOS
 

Offline wurzel

  • Sr. Member
  • ****
  • Join Date: Jan 2007
  • Posts: 273
    • Show only replies by wurzel
    • http://www.wurzel.co.uk
Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #45 on: January 19, 2017, 02:13:20 PM »
Quote from: kolla;820072
That one is easy - it doesn't.


Actually, it`s working quite well on my system.
Logged
--
A1200 Power Tower, Blizzard 060 with SCSI, 196mb Ram, Mediator, Voodoo 5500, Spider USB, Hauppage TV, Soundblaster & Fast Ethernet cards, 2gb boot/program drive, 40gb data drive, 40x12x48 CDRW
 

Offline Oldsmobile_Mike

Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #46 on: January 19, 2017, 02:41:58 PM »
Quote from: wurzel;820077
Actually, it`s working quite well on my system.


*cough cough*

See your signature?  "A1200 Power Tower, Blizzard 060 with SCSI, 196mb Ram, Mediator, Voodoo 5500, Spider USB, Hauppage TV, Soundblaster & Fast Ethernet cards, 2gb boot/program drive, 40gb data drive, 40x12x48 CDRW"

That's why. :(
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline wurzel

  • Sr. Member
  • ****
  • Join Date: Jan 2007
  • Posts: 273
    • Show only replies by wurzel
    • http://www.wurzel.co.uk
Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #47 on: January 19, 2017, 05:06:39 PM »
Quote from: Oldsmobile_Mike;820080
*cough cough*

See your signature?  "A1200 Power Tower, Blizzard 060 with SCSI, 196mb Ram, Mediator, Voodoo 5500, Spider USB, Hauppage TV, Soundblaster & Fast Ethernet cards, 2gb boot/program drive, 40gb data drive, 40x12x48 CDRW"

That's why. :(


Heh, well, it does say that it's targeted at higher end systems.

I was just pointing out that it *does* work, providing you have the right hardware. To say that it' doesn't work just needs correcting.
Logged
--
A1200 Power Tower, Blizzard 060 with SCSI, 196mb Ram, Mediator, Voodoo 5500, Spider USB, Hauppage TV, Soundblaster & Fast Ethernet cards, 2gb boot/program drive, 40gb data drive, 40x12x48 CDRW
 

Offline duga

Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #48 on: January 19, 2017, 05:39:44 PM »
MUI 5.0 is working with ACA620/16 MHz. Probably not as fast as MUI 3.8, but it's *working*.
Logged
 

Offline Oldsmobile_Mike

Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #49 on: January 19, 2017, 05:45:09 PM »
Quote from: duga;820097
MUI 5.0 is working with ACA620/16 MHz. Probably not as fast as MUI 3.8, but it's *working*.

Did you do a fresh install or install over-top of an existing 3.8 install?

What classic/68K MUI applications have you tested with it?

I'm just asking because I've seen a ton of posts from folks who've had issues with later versions (especially, it seems like, 3.9 was particularly problematic).  It might help folks in the future to document any steps taken or particular challenges when using versions later than "good 'ole" 3.8.  ;)
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline duga

Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #50 on: January 19, 2017, 05:48:42 PM »
Probably over-top of existing 3.8 install. Not sure if it was 4.0 or 5.0, at least not as new as 2016R3.

Maybe I have to take my A600 out from storage and check.

Anyway, iBrowse 2.4 with 020 and ECS is in no way considered "fun" no matter if it's MUI 3.8 or 5.0.
Logged
 

Offline duga

Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #51 on: January 19, 2017, 09:41:28 PM »
Setup: A600 with ACA620/16 MHz and 3COM PCMCIA running latest Roadshow68k.

The latest I had tested before was 4.0-2016R1.

I've gone 3.8 -> 4.0-2016R1 -> 3.8 -> 5.0-2016R3. iBrowse 2.4 is working fine, but I tested it only for 5-10 minutes. If I should complain about anything it's the fact that the default fonts are clearly chosen for modern screen resolutions, not ECS low-res.

So iBrowse 2.5 in combination with MUI 5.0 (both in 020 versions) should probably be fine.
Logged
 

Offline darkage

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 583
    • Show only replies by darkage
Re: MUI 5.0-2016R3 for AmigaOS4/PPC and AmigaOS3/m68k released
« Reply #52 on: January 20, 2017, 02:50:02 PM »
Im assuming my Bliz 030 IV with FPU is probably too slow for this update.
Logged
 
Pages: 1 2 3 [4]   Go Up
« previous next »