Welcome, Guest. Please login or register.

Author Topic: Kikstart 3.9, Amiga 1200, and Video Mode  (Read 869 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mistermskTopic starter

  • Jr. Member
  • **
  • Join Date: Jun 2010
  • Posts: 68
    • Show only replies by mistermsk
Kikstart 3.9, Amiga 1200, and Video Mode
« on: December 22, 2015, 05:43:52 PM »
Hi All,

 I was just curious. I have an NTSC machine that I was trying to make PAL mode but that isn't going well. Long story short, its finally working again.

Anyway, I was just curious. I know you can hold both mouse buttons down. Select PAL and go into PAL this way. This is what I do every time I start my Amiga 1200. I have the dual boot happening where when I turn on my 1200, it loads from ROM 3.1. Then it does a second boot and loads 3.9 from the hard drive. Is there anyway on the second boot. That I could have it select Double PAL (I believe that is the name of it) automatically? I mean since it is software driven, there should be a way of doing this, I assume.

Just curious.
 

Offline Oldsmobile_Mike

Re: Kikstart 3.9, Amiga 1200, and Video Mode
« Reply #1 on: December 22, 2015, 06:11:47 PM »
Since you mention 3.9, I assume you're talking about for system-friendly stuff.  Just change your screenmode in Workbench.  Is there some reason that you need it to be in PAL all the time?

PS - the double reboot with 3.9 is normal, that's what allows it to patch the ROM stuff.  Only way to get around it is to burn a custom 3.9 ROM.  If you didn't already know.  ;)
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline slaapliedje

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Oct 2010
  • Posts: 843
  • Country: 00
  • Thanked: 1 times
    • Show only replies by slaapliedje
Re: Kikstart 3.9, Amiga 1200, and Video Mode
« Reply #2 on: December 23, 2015, 02:17:19 AM »
One of the reasons I love my A4000D, it has a jumper so I just leave it in PAL, unlike the Atari STs, it seems to me 90% (okay, I'm pulling that number out of nothing but some very limited experience) of software was written with PAL machines in mind.  

I know there were quite a few games that I attempted to play that were completely broken until I switched to PAL.  

I do highly recommend getting a custom kickstart burned, my system sure does seem to boot a heck of a lot quicker with certain newer libraries in ROM.  I still need to figure out which libraries those are for when I do my set up again, so that I don't end up re-loading them and having the system reset because of it.

slaapliedje
A4000D: Mediator 4000Di; Voodoo 3, ZorRAM 128MB, 10/100mb Ethernet, Spider 2. Cyberstorm PPC 060/50 604e/420.
 

Offline Oldsmobile_Mike

Re: Kikstart 3.9, Amiga 1200, and Video Mode
« Reply #3 on: December 23, 2015, 03:07:48 AM »
Quote from: slaapliedje;800616
I know there were quite a few games that I attempted to play that were completely broken until I switched to PAL.

I haven't had any problems with those when using WHDLoad to switch to PAL when needed.  Obviously your mileage may vary.  ;)
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos