Welcome, Guest. Please login or register.

Author Topic: A few questions about the GVP Impact A500 HD8+ Series II  (Read 13618 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline smerf

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1666
    • Show only replies by smerf
Re: A few questions about the GVP Impact A500 HD8+ Series II
« Reply #44 from previous page: October 05, 2017, 09:13:38 AM »
Hi,
Had a gvp card for my old Amiga 2000, when I tried to get it working I had to change a line from SCSI to gvp.SCSI I believe it was in the HD setup. Can not totally remember for it has been about 5 years or more since I played with SCSI drives.
I have no idea what your talking about, so here is a doggy with a small pancake on his head.

MorphOS is a MAC done a little better
 

Offline motrucker

Re: A few questions about the GVP Impact A500 HD8+ Series II
« Reply #45 on: October 05, 2017, 07:56:15 PM »
Quote from: smerf;831328
Hi,
Had a gvp card for my old Amiga 2000, when I tried to get it working I had to change a line from SCSI to gvp.SCSI I believe it was in the HD setup. Can not totally remember for it has been about 5 years or more since I played with SCSI drives.

The point here is that you must use the correct name for the SCSI driver, which is dependent on the interface used, so this would be gvp.SCSI for an A500 or A2000.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline Oldsmobile_Mike

Re: A few questions about the GVP Impact A500 HD8+ Series II
« Reply #46 on: October 05, 2017, 10:10:16 PM »
Quote from: motrucker;831344
The point here is that you must use the correct name for the SCSI driver, which is dependent on the interface used, so this would be gvp.SCSI for an A500 or A2000.


gvpscsi.device or omniscsi.device, depending on if you have the Guru-ROM. :D
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline scuzzb494

Re: A few questions about the GVP Impact A500 HD8+ Series II
« Reply #47 on: October 06, 2017, 12:58:44 AM »
Me last month ...

http://www.scuzzscink.com/amiga/scuzzblog_september17/scuzzblogdseptember17_1304.htm

Me in August ...

http://www.scuzzscink.com/amiga/scuzzblog_august17/scuzzblogdaugust17_1402x.htm

I switch on a GVP each morning first thing with my 500 in the workshop. Sadly the drives do eventually die but they are a pretty hard working unit. Fortunately I have enough to see me out.

The 590 is funny cus it has this fan that will kick in at odd times. I just tap the case and it stops. Thing is it is so noisy it will wake up the neighbourhood .. so I do have to remember I left it on. I could disable it but just adds a bit of character to the unit.

Some of the GVPs power up on the switch and others power up when the Amiga powers up. My Turbo only kicks in when the 500 fires up. The one in the Workshop runs from the switch from the getgo. I actually prefer the 590s on the XT.

Offline motrucker

Re: A few questions about the GVP Impact A500 HD8+ Series II
« Reply #48 on: October 07, 2017, 03:18:40 AM »
Quote from: Oldsmobile_Mike;831350
gvpscsi.device or omniscsi.device, depending on if you have the Guru-ROM. :D

Thanks for the correction. Can't believe I got that wrong..... Must be getting old.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+