Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1] 2   Go Down

Author Topic: Multiview snag  (Read 3116 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline motruckerTopic starter

Multiview snag
« on: November 30, 2014, 12:12:11 PM »
I just did a new install of 3.1 on my A2000 (in prep for a new 3.5 install as soon as my "new" CD drive is in).
Problem is, for some reason Multiview is not working. The file is where it belongs (I think) in the Workbench/Utilities drawer. Any ideas why it refuses to work? What am I forgetting.....
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline ElPolloDiabl

  • Hero Member
  • *****
  • Join Date: May 2009
  • Posts: 1702
    • Show only replies by ElPolloDiabl
Re: Multiview snag
« Reply #1 on: November 30, 2014, 01:45:20 PM »
Check path in the startup-sequence.
To fix mine I made a copy of it and put it in the C directory so i wouldn't have to worry about the startup-sequence.
Logged
Go Go Gadget Signature!
 

Offline motruckerTopic starter

Re: Multiview snag
« Reply #2 on: November 30, 2014, 03:02:52 PM »
Do you know what the assign statement is supposed to look like? I tried putting a copy in C, and still nothing. Thought maybe that copy of Multiview might be corrupted, so I tried another copy - still no go. This is driving me crazy.
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline ElPolloDiabl

  • Hero Member
  • *****
  • Join Date: May 2009
  • Posts: 1702
    • Show only replies by ElPolloDiabl
Re: Multiview snag
« Reply #3 on: November 30, 2014, 03:32:58 PM »
It should be Path RAM: SYS:Utilities SYS:Tools (and so on)

Also check if Amigaguide is in the devs/datatypes drawer.
Logged
Go Go Gadget Signature!
 

Offline zipper

Re: Multiview snag
« Reply #4 on: November 30, 2014, 04:49:25 PM »
For starters you could check if these libraries are available:
369   KingCON DOS-proces OpenLib    intuition.library           Ver 37  OK  
 370   KingCON DOS-proces OpenLib    gadtools.library            Ver 37  OK  
 371   KingCON DOS-proces OpenLib    graphics.library            Ver 37  OK  
 372   KingCON DOS-proces OpenLib    utility.library             Ver 37  OK  
 373   KingCON DOS-proces OpenLib    workbench.library           Ver 37  OK  
 374   KingCON DOS-proces OpenLib    diskfont.library            Ver 36  OK  
 375   KingCON DOS-proces OpenLib    iffparse.library            Ver 37  OK  
 376   KingCON DOS-proces OpenLib    asl.library                 Ver 37  OK  
 377   KingCON DOS-proces OpenLib    icon.library                Ver 37  OK
Logged
 

Offline Oldsmobile_Mike

Re: Multiview snag
« Reply #5 on: November 30, 2014, 07:25:27 PM »
When you say it's "not working", can you be more specific? Does it just not open when you double-click on it's icon? Have you tried starting it from the shell? Does it give any sort of error message?

IMHO 3.9 is a lot better then 3.5. ;)
« Last Edit: December 01, 2014, 07:08:00 AM by Oldsmobile_Mike »
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline motruckerTopic starter

Re: Multiview snag
« Reply #6 on: December 01, 2014, 04:36:43 AM »
It will not run, either from double clicking on a file, or the Multiview Icon, or from CLI. It just sits there - and does nothing, with NO error message at all.
BTW at this point this is just 3.1.
Some else pointed out the Multiview library needs to be installed too, and it wasn't. But with it installed, there is still no action. This is frustrating.
I may try one of the Multiview replacements on aminet......
 
@ Oldsmobile Mike  -  I will not argue that 3.9 might be better. But, I don't have 3.9 (and I do have 3.5) I don't know that I can even afford 3.9 right now. I'll keep an eye out though.
« Last Edit: December 01, 2014, 04:40:52 AM by motrucker »
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline ElPolloDiabl

  • Hero Member
  • *****
  • Join Date: May 2009
  • Posts: 1702
    • Show only replies by ElPolloDiabl
Re: Multiview snag
« Reply #7 on: December 01, 2014, 04:43:06 AM »
could you copy your startup-sequence here. I bet thats where the problem is.
Also you are using the 3.1 Roms?
Logged
Go Go Gadget Signature!
 

Offline motruckerTopic starter

Re: Multiview snag
« Reply #8 on: December 01, 2014, 05:19:51 AM »
Yep, 3.1 ROMS. I'll put the 2000 back together in a minute, and give you all the startup sequence......
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline zipper

Re: Multiview snag
« Reply #9 on: December 01, 2014, 10:04:35 AM »
Launch snoopdos (or dostrace) before you try - it may show what's missing/searched for.
Logged
 

Offline motruckerTopic starter

Re: Multiview snag
« Reply #10 on: December 01, 2014, 10:39:32 AM »
; $VER: startup-sequence 38.22 (24.4.92)

C:SetPatch QUIET
Version >NIL:
AddBuffers >NIL: DF0: 15
FailAt 21

MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
assign excellence!: Data-Three:excellence!
assign doctools: Data-Three:doctools

IF NOT EXISTS SYS:Fonts
  Assign FONTS:
EndIF

BindDrivers
Mount >NIL: DEVS:DOSDrivers/~(#?.info)

Resident >NIL: C:Execute PURE

IF EXISTS DEVS:Monitors
  List >NIL: DEVS:Monitors/~(#?.info) TO T:M LFORMAT "DEVS:Monitors/%s"
  Execute T:M
  Delete >NIL: T:M
EndIF

SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

IPrefs

Echo "Amiga Release 2.1.  Kickstart $Kickstart, Workbench $Workbench"

ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

IF EXISTS S:User-Startup
  Execute S:User-Startup
EndIF

Resident Execute REMOVE

LoadWB
Execute S:WPAssigns

EndCLI >NIL:
 
 
Here's the startup sequence. Any ideas?
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline motruckerTopic starter

Re: Multiview snag
« Reply #11 on: December 01, 2014, 12:32:53 PM »
I just noticed something. I am missing a few libraries:
    intuition.library ,  gadtools.library, and graphics.library. Could this be the problem? If it is, where do I find these libraries?
I never had a problem with this feature in the past. Why now?
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline Leffmann

  • Full Member
  • ***
  • Join Date: Feb 2011
  • Posts: 119
    • Show only replies by Leffmann
Re: Multiview snag
« Reply #12 on: December 01, 2014, 01:08:48 PM »
Those libraries are all built into the ROM, so they're not missing, and it's probably just a version mismatch. Upgrading to Workbench 3.1 would probably fix it.
Logged
 

Offline ElPolloDiabl

  • Hero Member
  • *****
  • Join Date: May 2009
  • Posts: 1702
    • Show only replies by ElPolloDiabl
Re: Multiview snag
« Reply #13 on: December 01, 2014, 01:41:23 PM »
Before Iprefs
C:AddDatatypes REFRESH

Otherwise backup the startup-sequence then copy the startup-sequence from your workbench floppy and use that.
I'll try and recreate your problem.
Logged
Go Go Gadget Signature!
 

Offline zipper

Re: Multiview snag
« Reply #14 on: December 01, 2014, 02:48:06 PM »
Seems to be 2.x startup-sequence - don't remember what's changed in 3.x. So do check from your WB floppy.
« Last Edit: December 01, 2014, 02:53:42 PM by zipper »
Logged
 
Pages: [1] 2   Go Up
« previous next »