Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: Need Amiga Mother Board Repairs in U.S. or I'm Out.  (Read 7296 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #14 on: February 20, 2014, 04:35:09 AM »
Quote from: Lionheart;759254
What kind of problems are you having with them?


I just received an e-mail back from that Charles guy. Quick response I must say! :)

 Anyhow, all four of them have audio issues. Crackling and all that jazz. The PAL 600 needs it's PCMCIA port replaced. The NTSC 600 needs it's IDE port replaced. The PAL 1200 just needs recapped as far as I can tell. And the NTSC 1200 needs it's kickstart sockets replaced...

...a result of me trouble shooting a purchase from Amigakit.
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline QuikSanz

Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #15 on: February 20, 2014, 04:58:13 AM »
Quote from: Lionheart;759253
Replacing capacitors is relatively easy and shouldn't take up too much time.  However,  there are some brands you should avoid.  See: List of Bad Cap Manufacturers


My eyes need some work. I have worked much on hole thru replacement, Surface Mount is out of the question for my eyes right now.

Chris
Logged
 

Offline amiman99

Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #16 on: February 20, 2014, 05:05:07 AM »
Quote from: XDelusion;759252
Good find! Thank you, I wrote him!
---
No problem!
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #17 on: February 20, 2014, 02:09:19 PM »
Quote from: Lionheart;759253
Replacing capacitors is relatively easy and shouldn't take up too much time.  However,  there are some brands you should avoid.  See: List of Bad Cap Manufacturers


Is there a  list of good cap manufacturers sites? :)
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline Lionheart

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Posts: 68
    • Show only replies by Lionheart
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #18 on: February 20, 2014, 03:36:39 PM »
Quote from: XDelusion;759285
Is there a  list of good cap manufacturers sites? :)


Sure: List of Good Capacitor Manufacturers
Logged
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #19 on: February 20, 2014, 04:06:47 PM »
Quote from: Lionheart;759294
Sure: List of Good Capacitor Manufacturers


Funny, they mentioned the lack of a "good list" in that very forum. :)
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline Lionheart

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Posts: 68
    • Show only replies by Lionheart
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #20 on: February 20, 2014, 05:10:33 PM »
Quote from: XDelusion;759255
I just received an e-mail back from that Charles guy. Quick response I must say! :)

 Anyhow, all four of them have audio issues. Crackling and all that jazz. The PAL 600 needs it's PCMCIA port replaced. The NTSC 600 needs it's IDE port replaced. The PAL 1200 just needs recapped as far as I can tell. And the NTSC 1200 needs it's kickstart sockets replaced...

...a result of me trouble shooting a purchase from Amigakit.


The audio problems you're experiencing could be caused by bad capacitors and/or electromagnetic interference.  Check for any bulging caps and for any brown rust-like material on, under, or near the capacitors.  Not all capacitors that have gone bad will show physical signs, but it doesn't hurt to check since it is a sure sign that they have gone bad. The IDE port is easy to fix and the PCMCIA isn't that hard but takes more time.

Also, bad traces can also cause problems, especially on older motherboards.  If you have a USB microscope and a multimeter, look for any corrosion and check the continuity between traces.  Even if there is a loss of connection between traces due to corrosion it is still possible to fix it.
Logged
 

Offline Lionheart

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Posts: 68
    • Show only replies by Lionheart
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #21 on: February 20, 2014, 05:16:32 PM »
Quote from: XDelusion;759298
Funny, they mentioned the lack of a "good list" in that very forum. :)


I'll admit that link isn't very helpful since some people are selling fakes of good brands. What you want are Japanese capacitors.  This might be of more help: How to Identify Japanese Electrolytic Capacitors
Logged
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #22 on: February 20, 2014, 05:17:37 PM »
Quote from: Lionheart;759303
The audio problems you're experiencing could be caused by bad capacitors and/or electromagnetic interference.  Check for any bulging caps and for any brown rust-like material on, under, or near the capacitors.  Not all capacitors that have gone bad will show physical signs, but it doesn't hurt to check since it is a sure sign that they have gone bad. The IDE port is easy to fix and the PCMCIA isn't that hard but takes more time.

Also, bad traces can also cause problems, especially on older motherboards.  If you have a USB microscope and a multimeter, look for any corrosion and check the continuity between traces.  Even if there is a loss of connection between traces due to corrosion it is still possible to fix it.



Indeed, the A600 that I waited 3 years to have recapped also had bad traces. Since the IDE port on it is screwed though, I've not had a chance to test the audio yet. :)

Needless to say, the prices I've been offered for repairs on all four boards are most certainly within my ball park. I do believe I shall have them all repaired, then will probably part with the PAL boards after I get them back and have tested them. Considering I can have everything repaired kind of makes me want to have a 600 and 1200, fully decked out. It will be like having two new units... or so I hope, in which case I need not worry about FPGA for the moment.

Alas, one of these threads paid off! :)

This is the second or third time amiman99 has saved the day for me.
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline Dandy

  • Hero Member
  • *****
  • Join Date: Apr 2004
  • Posts: 1221
    • Show only replies by Dandy
    • http://www.wiehltalbahn.de/en/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #23 on: February 24, 2014, 07:52:33 AM »
Quote from: XDelusion;759210


I'd be better off piecing things out and making some cash as opposed to shipping my goods to Europe.
...



:-D
Yes - of course. You would have to be afraid we implemented some spyware - as a sort of revenge for the NSA activities here...
:-P
Logged
All the best,

Dandy

Website maintained by me

If someone enjoys marching to military music, then I already despise him. He got his brain accidently - the bone marrow in his back would have been sufficient for him! (Albert Einstein)
 

Offline wawrzon

Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #24 on: February 24, 2014, 08:02:03 AM »
@xdelusion
even if shipping to europe isnt an option you may ask around in international section on a1k.org. there is a number of people there who can fix stuff, i have got a board repaired by one of them
Logged
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #25 on: March 02, 2014, 01:06:21 AM »
Quote from: Dandy;759567
:-D
Yes - of course. You would have to be afraid we implemented some spyware - as a sort of revenge for the NSA activities here...
:-P


I hear you man... my ancestors are native after all. Believe me, that history is still very much alive and well as far as I'm concerned. Though with the NSA and all this jazz...

...I really don't think America is the center of it all, I believe the power has always been more of a Global nature, though like The Phantom Menace or politics in general, America has became the front man to take the blame. I mean haven't you noticed that everything is anti-America now a days, even though the rest of the world that is in bed with the U.N. is guilty of the same practices. I mean didn't Britain drop an atom bomb of their own, but no one ever talks about that.

 I have no love for political empires, no love for the new world order, or religion as an institutional power. So from where I stand, I have nothing to do with any of that NSA B.S. or anything else being reported on osnews.com.

BTW, how's the EU feeling? Like those cameras down your back on every street corner? Can't say I'm looking forward to the American union my self not to mention all the cameras that have began to show up here either.

 Anyhow, I'm going to bury my head back into my Amiga now. ;)
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #26 on: March 02, 2014, 01:07:10 AM »
Quote from: wawrzon;759568
@xdelusion
even if shipping to europe isnt an option you may ask around in international section on a1k.org. there is a number of people there who can fix stuff, i have got a board repaired by one of them


I've shipped out to this guy:

http://www.maccaps.com/MacCAPS.COM/Macintosh_Recaps.html#3

His communications are great and he's only 2 hours north of me, win win!!! :)
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline DutchinUSA

  • Full Member
  • ***
  • Join Date: Feb 2012
  • Posts: 222
    • Show only replies by DutchinUSA
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #27 on: March 02, 2014, 12:48:01 PM »
So you sent out all 4 boards you were talking about? Make sure you post back and let us known how it worked out ! :)
Logged
 

Offline danbeaver

Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #28 on: March 02, 2014, 06:14:59 PM »
I just sent out four A4000D (B) motherboards to Anthony Hoffman in Christchurch, NZ with various problems this past week.  With USPS Priority Express ($83 USD) it will likely take two weeks to get there, but his website (http://amiga.serveftp.net/) makes me think that I'll get a good evaluation and repair done on them.  I'll report back with times, costs, etc.
Logged
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: Need Amiga Mother Board Repairs in U.S. or I'm Out.
« Reply #29 from previous page: March 02, 2014, 08:03:33 PM »
Quote from: DutchinUSA;760009
So you sent out all 4 boards you were talking about? Make sure you post back and let us known how it worked out ! :)


I'm sending them as I can afford to get them fixed, so so far there is just an A600 on it's way.  And yes I shall be sure to come back singing his praises very soon me hopes! :)
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 
Pages: 1 [2] 3   Go Up
« previous next »