Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Trying to figure out which controller to boot from  (Read 1691 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline IggyTopic starter

  • Hero Member
  • *****
  • Join Date: Aug 2009
  • Posts: 5348
    • Show only replies by Iggy
Trying to figure out which controller to boot from
« on: July 15, 2013, 04:38:38 AM »
Which would make a better (faster/better through put) controller for a hard drive in my A2000, the SCSI II interface on my GVP '040 accelerator (connected to an SCSI III or better drive) or the IDE connector on an X -SURF 3CC board (connected to an ATA100 or 133 drive)?

Does anyone know if GVP used a wide or narrow fast controller (I'm inclined to think the former)?
Logged
"Not making any hard and fast rules means that the moderators can use their good judgment in moderation, and we think the results speak for themselves." - Amiga.org, terms of service

"You, got to stem the evil tide, and keep it on the the inside" - Rogers Waters

"God was never on your side" - Lemmy

Amiga! "Our appeal has become more selective"
 

Offline nicholas

Re: Trying to figure out which controller to boot from
« Reply #1 on: July 15, 2013, 04:58:51 AM »
Quote from: Iggy;740833
Which would make a better (faster/better through put) controller for a hard drive in my A2000, the SCSI II interface on my GVP '040 accelerator (connected to an SCSI III or better drive) or the IDE connector on an X -SURF 3CC board (connected to an ATA100 or 133 drive)?

Does anyone know if GVP used a wide or narrow fast controller (I'm inclined to think the former)?

SCSI wins for speed and CPU consumption everytime, but if it's just a boot drive only then the IDE would suffice.

IDE would make it easier to mount the drive in a PC/Mac for use with emulators or MorphOS etc.
Logged
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline Jope

Re: Trying to figure out which controller to boot from
« Reply #2 on: July 15, 2013, 05:33:23 AM »
SCSI on the accelerator all the way.
Logged
 

Offline IggyTopic starter

  • Hero Member
  • *****
  • Join Date: Aug 2009
  • Posts: 5348
    • Show only replies by Iggy
Re: Trying to figure out which controller to boot from
« Reply #3 on: July 15, 2013, 07:30:32 AM »
OK, that is kind of what I thought.
Plus I have some later SCSI drives that are backward compatible with the right adapter.
Imagine an Amiga with a 10,000 or 15,000 rpm drive.
BTW - What problems am I'm going to have to deal with in terms of drive (or partition) size limitations?
Logged
"Not making any hard and fast rules means that the moderators can use their good judgment in moderation, and we think the results speak for themselves." - Amiga.org, terms of service

"You, got to stem the evil tide, and keep it on the the inside" - Rogers Waters

"God was never on your side" - Lemmy

Amiga! "Our appeal has become more selective"
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: Trying to figure out which controller to boot from
« Reply #4 on: July 15, 2013, 07:32:03 AM »
Plus I don't think the X-Surf IDE can be made to boot.
Logged
 

Offline Oldsmobile_Mike

Re: Trying to figure out which controller to boot from
« Reply #5 on: July 15, 2013, 07:46:14 AM »
Quote from: Iggy;740841
Imagine an Amiga with a 10,000 or 15,000 rpm drive.
BTW - What problems am I'm going to have to deal with in terms of drive (or partition) size limitations?


You're still going to be limited by the xfer speed of your controller.

The usual - depends on the capability of your controller and whether you're using 3.1 vs 3.9, FFS/SFS/PFS, etc.
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline IggyTopic starter

  • Hero Member
  • *****
  • Join Date: Aug 2009
  • Posts: 5348
    • Show only replies by Iggy
Re: Trying to figure out which controller to boot from
« Reply #6 on: July 15, 2013, 08:32:28 AM »
Quote from: Oldsmobile_Mike;740843
You're still going to be limited by the xfer speed of your controller.

The usual - depends on the capability of your controller and whether you're using 3.1 vs 3.9, FFS/SFS/PFS, etc.

Of course, still, having a drive that exceeds the specs of the controller won't hurt performance.
I still haven't heard as to whether GVP used a wide or narrow fast controller (although considering when it was made, narrow seems likely).

The setup?
3.9 with a  PFS3 filesystem.
Logged
"Not making any hard and fast rules means that the moderators can use their good judgment in moderation, and we think the results speak for themselves." - Amiga.org, terms of service

"You, got to stem the evil tide, and keep it on the the inside" - Rogers Waters

"God was never on your side" - Lemmy

Amiga! "Our appeal has become more selective"
 

Offline Toni Milton

  • Newbie
  • *
  • Join Date: Jul 2013
  • Posts: 0
    • Show only replies by Toni Milton
Re: Trying to figure out which controller to boot from
« Reply #7 on: July 15, 2013, 09:54:05 AM »
As wonderful as computers can be, they can also be incredibly infuriating. Probably the most frustrating problem computer users run into are startup problems, where your computer won’t boot. Equally annoying are error messages you constantly run into during your computer’s startup process. In this article I’ll give you a few tips on how you can avoid some of the most common problems that happen right after your computer turns on.:roflmao::afro:

Short Sale San Diego
San Diego Short Sale
Logged
 

Offline nicholas

Re: Trying to figure out which controller to boot from
« Reply #8 on: July 15, 2013, 10:37:18 AM »
My God these spammers are getting desperate.

Sod off!
Logged
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline matt3k

Re: Trying to figure out which controller to boot from
« Reply #9 on: July 15, 2013, 11:51:48 AM »
Why not go silent with an SSD?  There are SATA/SCSI converters.  Drives are cheap, but the adapters can be pricey.

PFS3 is about the best option out there, 3.9 is fine, although you could try some of the light variants out there if you don't mind losing eyecandy...  Used betterwb for abit, pretty snappy...

Saw you were going with the PIV, these are the best Zorro Video card.  I have never had or tried one, but wish I had one...
Logged
 

Offline nicholas

Re: Trying to figure out which controller to boot from
« Reply #10 on: July 15, 2013, 12:55:08 PM »
Quote from: matt3k;740853
Why not go silent with an SSD?  There are SATA/SCSI converters.  Drives are cheap, but the adapters can be pricey.

PFS3 is about the best option out there, 3.9 is fine, although you could try some of the light variants out there if you don't mind losing eyecandy...  Used betterwb for abit, pretty snappy...

Saw you were going with the PIV, these are the best Zorro Video card.  I have never had or tried one, but wish I had one...

I have a PIV, it is a great card indeed.

I also hav a 32GB SDHC card connected to an ACard IDE to SCSI adapter plugged into my CSMK2/060 and it's lightning fast.

Well, when it's not in pieces awaiting a rebuild that is! :)
« Last Edit: July 15, 2013, 01:04:19 PM by nicholas »
Logged
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 
Pages: [1]   Go Up
« previous next »