getting online ..i give up ..help!

[AAACHIPSET]

think i will admit defeat with my current pcmcia 3com etherlink combo..tried all the drivers card patch resets etc..can see the card is reseting ..light goes off an on ..etc..but my 1200 just cannot seem to find the card so i give up ..maybe the card an cable bought seperatley are not compatible ..anyway ..what im seeking ..unless someone has a ready made solution ..is advice on what other cards are compatible an used by people on here ..wireless  or not so i can keep my eyes on ebay for maybe a solution that will work..really would like this machine online  eventually..one day..:>

[arnljot]

I see from your signature that you've got an accelerator.

Not all are PCMCIA friendly, which one do you have and have you tried without it?

Kinda obvious question, but needs asking. Which chip is in your network card, and have you checked that it's supported with the sana2 driver you want to use?

[nicholas]

Just buy this, it will make things much easier for you.
http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=586

[doctorq]

I made this guide many years ago, but it might help you out on getting your Amiga online.

http://doctorq.info/guide/miami.html

[Jiffy]

Which 3Com card is it? You need a 3C589 variant for it to work with your A1200.

[delshay]

I am also off line being this way for some time now, but I am not to bothered about it now, as I can spend more time out of forums and get on with more important things.

[Lurch]

What card are you using?
What's in your user-startup/startup-sequence?
What accelerator are you using?
What TCP stack are you using?

[Swivel]

I'd like to get mine online (A1200 3.1wb, 4gig cf card for HD, 4 meg addon mem card (ok with pcmcia with 4meg but 8meg is a no go).
 
Cards I have are (so what would work)
 
3com (wireless) 3CRGPC10075
D-Link DWL-G650 Wireless
D-Link DFE-690TXD
D-Link DE-660+
 
Also would like my PCMCIA port to trans files via cf card (I get NDOS??? when I put a 4gig in there).
 
Have installed
3c589
cnetdevice
cfd
fat95
 
Still lost and also whats a good browser for this setup (if I get online LOL)
 
Thanks for any help
 
Tomo

[Snoozy]

Hi go with miami as easynet is annoying on the tcp stack set up.

Here is a thread from a few years back when i was struggling with this:

http://www.amiga.org/forums/showthread.php?t=59988

There is also another thread over at amibay:

http://www.amibay.com/showthread.php?t=24984

Well i hope that can be of use to you and save you some time

[ncafferkey]

I'd like to get mine online (A1200 3.1wb, 4gig cf card for HD, 4 meg addon mem card (ok with pcmcia with 4meg but 8meg is a no go).
 
Cards I have are (so what would work)
 
3com (wireless) 3CRGPC10075
D-Link DWL-G650 Wireless
D-Link DFE-690TXD
D-Link DE-660+

Only the DE-660+ is a PCMCIA card (the rest are CardBus cards: you can tell by the copper strip on the connector). The DE-660+ might work with cnet.device.