Welcome, Guest. Please login or register.

Author Topic: Delfina Plus won't init or load ahi  (Read 983 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline matt3kTopic starter

Delfina Plus won't init or load ahi
« on: May 21, 2013, 11:20:40 AM »
I picked up a Delfina Plus and the original owner used Delfinit and delfmpeg to demo the card to me.  For the demo He used Version 4.14 of the library.

I was able to get into AHI once and Delfina wasn't listed, now the system locks up or slows down dramatically if I try to load AHI.

I have tried many verisons (4.14, 4.16,41.6 B, and 4.17B) everytime I run either Delfinit or Delfmem it either locks up or slow the system down, or occasionally delfinit will do nothing on a boot without SS.

Any pointers?
 

Offline Marmes

  • Full Member
  • ***
  • Join Date: Jun 2012
  • Posts: 123
    • Show only replies by Marmes
Re: Delfina Plus won't init or load ahi
« Reply #1 on: May 21, 2013, 11:35:00 AM »
Delfina is a Bitch...to configure correctly, if you use OS3.9, try just to put BB1
and test, if it works ok, put BB2 and don't go further.  People say that you have to have amiga amp allways runing on background so it doesn't crash.
Here are the drivers given by a good friend here :)
 

Offline matt3kTopic starter

Re: Delfina Plus won't init or load ahi
« Reply #2 on: June 03, 2013, 01:46:46 AM »
Thanks!

I reinstalled to BB1 and tested, then to BB2.  No issues, didn't realize that the newer BB could cause trouble...