How to edit startup sequnce?

[carvedeye]

Hi all I am trying to get FBlit installed but have not got the foggiest how to edit the startup sequence if someone can tell me exactly how to do it I will be very grateful

[Rob]

The startup sequence is located in S:  Unless the FBlit documentation specifically tells you to put it in the startup-sequence then I'd put it in user-startup instead.  Both files can be edited in any text editor as long as you save it back as plain text.

If it must go in the startup-sequence it will be at a specific point, which the documentation will tell you.  It's years since I've used it myself so I don't remember if it must.

For future reference; if you ever get an RTG card you'll need to remove FBlit or some of the graphics data won't get displayed by the video card.

[rvo_nl]

just hit amiga-e and type ed s:startup-sequence or ed s:user-startup as suggested.

[carvedeye]

just hit amiga-e and type ed s:startup-sequence or ed s:user-startup as suggested.

Well I figured it out but for some reason I see no speed up on my amiga as it is still not using my fast ram on workbench

[Steady]

Perhaps post your startup sequence and user startup here so people can see where you have added and any options supplied.

[magnetic]

You could also fire up any word processor or text editor and open S:Startup-sequence

ALWAYS MAKE A BACKUP FIRST!

[smf]

Well I figured it out but for some reason I see no speed up on my amiga as it is still not using my fast ram on workbench

If you are running os3.9 open up the workbench preferences sys:prefs/workbench and tell it to put icons in other memory instead of graphics memory.

[nicholas]

As well as FBlit you might want to install FText, FScreen and BlazeWCP.

Also IconLib_46.4  and StackAttack2 would be a good idea.

You can get them all from Aminet.

[paul1981]

Well I figured it out but for some reason I see no speed up on my amiga as it is still not using my fast ram on workbench

This may help you:

http://www.amiga.org/forums/showthread.php?t=60588