Welcome, Guest. Please login or register.

Author Topic: Amiga 3000 - Reason For Lockups  (Read 1991 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline KernelTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2006
  • Posts: 292
    • Show only replies by Kernel
Amiga 3000 - Reason For Lockups
« on: May 05, 2013, 05:28:30 PM »
I have another thread going on a DENEB issue that may be the cause of my lockups but in an effort not to flood that thread with stuff not related to the DENEB, can anyone out there provide the various reasons that an Amiga 3000 would just randomly lockup *AND* provide information on how to accurately test it?

For example, I have a voltage tester but have no idea how to go about testing the power supply; I have some RAM testing software on floppy and it appeared to come out clean but I have no idea if I let it run long enough or if the software is even considered acceptable.  I forget the name of it actually...

Thanks!
 

Offline danbeaver

Re: Amiga 3000 - Reason For Lockups
« Reply #1 on: May 05, 2013, 05:34:44 PM »
Check your D800 diode: A) It needs to work, B) It was often installed backward, and Thus C) It causes strange behavior if it is neither.
Hint: To replace it, the black stripe goes toward the mother board.

RAM errors are common with the ZIP ram and diagnosing it requires either filling it completely up, or removing it in steps.

Test your PSU under load, otherwise the results make no sense.

Mech (Mike) of A4000T.com fame, is excellent in diagnosing A3000 screwup's, give him a holler.
« Last Edit: May 05, 2013, 05:36:41 PM by danbeaver »
 

Offline VingtTrois

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Mar 2009
  • Posts: 897
  • Country: 00
    • Show only replies by VingtTrois
    • http://www.amiga.org/gallery/images/6006/1_2316_My_AMIGA_Collection_Sept2010.jpg
Re: Amiga 3000 - Reason For Lockups
« Reply #2 on: May 05, 2013, 06:12:12 PM »
Some mixed (manufacturers & speed) ZIP RAM  have some issues with the DENEB card!
-A3K(T)040@35MHz/78MB/KS3.1/OS3.9/Buster11/PICASSO II/GVP IO/A2088XT/DENEB/HDD18GB
-A3K(D)030@25MHz/134MB RAM/KS3.1/OS3.9/Buster11/RETINA Z2/OKTAGON 2008/VLAB YC/MIDI/DKB3128/HDD18GB
-A2K/ROM 1.3-3.1/2MBCHIP/8MB/A2091/OKTAGON 2008/A2058/TANDEM IDE/FlickerFixer-Scandoubler/Genlock
-A1200/KS3.1/2MB+9MB/CF2GB A1200[/