Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1] 2 3   Go Down

Author Topic: Indivision MK2 Beta config tool  (Read 10025 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Indivision MK2 Beta config tool
« on: April 11, 2013, 09:29:15 AM »
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline NovaCoder

Re: Indivision MK2 Beta config tool
« Reply #1 on: April 11, 2013, 10:02:40 AM »
Yep at last, personally I'm waiting for the next version which should have a test changes button
Logged
Life begins at 100 MIPS!


Nice Ports on AmiNet!
 

Offline JohnFante

  • Full Member
  • ***
  • Join Date: Aug 2004
  • Posts: 162
    • Show only replies by JohnFante
Re: Indivision MK2 Beta config tool
« Reply #2 on: April 11, 2013, 10:22:46 AM »
I have used it. And it grealy improved my Indivision. Before the picture was to one side of the monitor. After applying the standard settings it shows sharp and clearly in the middle. But as NovaCoder writes it is still not the most intuitive/userfriendly tool :-)
Logged
Booooiiiing!!!!
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Indivision MK2 Beta config tool
« Reply #3 on: April 11, 2013, 10:39:17 AM »
Anyone worked out how to remove the scanlines when playing WHDLoad games?

Prefer the sharper look :-(

Other than that workbench fills the entire monitor now and yes things are centered!!
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Indivision MK2 Beta config tool
« Reply #4 on: April 11, 2013, 10:41:56 AM »
Also noticed that if I use a VGA adapter output comes out blue no matter what settings I use.

Not too worried as I have been using DVI on my monitor.
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline AAACHIPSET

  • Sr. Member
  • ****
  • Join Date: Mar 2010
  • Posts: 397
    • Show only replies by AAACHIPSET
Re: Indivision MK2 Beta config tool
« Reply #5 on: April 11, 2013, 04:32:12 PM »
Quote from: Lurch;731779
What? No? Can't be? Yes!!!

http://www.a1k.org/forum/showpost.php?p=615679&postcount=565
my  workbench is fine ..only  games in whd  end up too far to the right sometimes  ..this is in english ?? ..an i cant stuff up my indivison  playing with it i hope..be nice to get a sharper screen  ..
Logged
A500 3.1/8meg/2gigscsi ...wants a 040
CD32/SX1/FMV/FLASHDRIVE/  wants sx32pro
A1200  os3.5 030/50/fpu/mmu/2flashdrives/cd/   indivision coming ..............wants a ppc/060  ACCEL :laughing:
 

Offline cicero790

  • Sr. Member
  • ****
  • Join Date: Mar 2008
  • Posts: 322
    • Show only replies by cicero790
Re: Indivision MK2 Beta config tool
« Reply #6 on: April 11, 2013, 07:16:39 PM »
@Lurch
Take only ”lines” instead of lines 25%,50% or 75%. That worked here. I also applied this on both pal and ntsc. For pal interlaced i turned lines off.


@AAACHIPSET
I think I solved that by going into all the screen modes in pal and ntsc  and then there, trim the overscan an save.
Logged
A1200 030 40MHz: 2/32MB Indivision AGA MkII
A600 7 MHz: 2MB
AROS 600 MHz
PC 13600 MHz: quad core i7 2600K 3.4GHz: 16GB RAM: ATI HD6950 2GB   (Yes I know)
WINUAE AmiKit ClassicWB AmigaSYS UAE4Droid  

 

Offline Oldsmobile_Mike

Re: Indivision MK2 Beta config tool
« Reply #7 on: April 11, 2013, 07:56:36 PM »
Dumb question but does this work with Indivision ECS?  Not that I have any problems with mine, or the current tool (think it's version 0.90 or something that I've got), just always like having more settings to play around with, LOL.  ;)
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Indivision MK2 Beta config tool
« Reply #8 on: April 11, 2013, 08:03:07 PM »
Quote from: cicero790;731811
@Lurch
Take only ”lines” instead of lines 25%,50% or 75%. That worked here. I also applied this on both pal and ntsc. For pal interlaced i turned lines off.


Will give that a go cicero :-)

@ Oldsmobile_Mike - No just for the indi mk2 :-)
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Indivision MK2 Beta config tool
« Reply #9 on: April 11, 2013, 10:22:39 PM »
Meh can't get the scanlines to go away LOL. Not the easiest to use tool, almost thought I was toast when I didn't get a picture coming up.

First rule of thumb don't panic when it comes to Amiga gear. But have it all back up again, WB looks fantastic, but still have scanlines.
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline J-Golden

  • TOP SECRET USER!!!
  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 1325
  • Country: us
  • Gender: Male
    • Show only replies by J-Golden
    • http://about.me/J.Golden
Re: Indivision MK2 Beta config tool
« Reply #10 on: April 11, 2013, 10:30:26 PM »
Neat!  I just rearranged the Mancave and got the A4000T up and running with this beauty in it.

Now to get the innerwebz working in it so I can download the tool...
Logged
AMIGA: (NOUN) THE FIRST COMPUTER THAT BRIDGED THE GAP BETWEEN HUMANITY AND TECHNOLOGY.
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Indivision MK2 Beta config tool
« Reply #11 on: April 11, 2013, 11:05:13 PM »
Best benefit is having the entire monitor with no black bars in Workbench. It's also fixed my corrupt screen that I seem to get when using ibrowse for long periods of time.

Not sure why it only does it with ibrowse, but the problem is now gone :-)

Games look great, only downside is the scanlines. I prefer it without on some games, will have another play when I get time, but coming together nicely.

Thanks Jen's look forward to more updates :-)
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline TheBilgeRat

  • Hero Member
  • *****
  • Join Date: May 2010
  • Posts: 1657
    • Show only replies by TheBilgeRat
Re: Indivision MK2 Beta config tool
« Reply #12 on: April 12, 2013, 12:37:03 AM »
Quote from: Oldsmobile_Mike;731817
Dumb question but does this work with Indivision ECS?  Not that I have any problems with mine, or the current tool (think it's version 0.90 or something that I've got), just always like having more settings to play around with, LOL.  ;)


I second this question.  :)
Logged
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Indivision MK2 Beta config tool
« Reply #13 on: April 12, 2013, 12:39:06 AM »
Quote from: TheBilgeRat;731851
I second this question.  :)


No, doesn't work with the Indi ECS :-)
Logged
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline TheBilgeRat

  • Hero Member
  • *****
  • Join Date: May 2010
  • Posts: 1657
    • Show only replies by TheBilgeRat
Re: Indivision MK2 Beta config tool
« Reply #14 on: April 12, 2013, 01:01:23 AM »
Quote from: Lurch;731852
No, doesn't work with the Indi ECS :-)


Durn!  Ah well, we'll get some love eventually.  It does work mostly fine right now, its just a little goofy on certain resolutions.
Logged
 
Pages: [1] 2 3   Go Up
« previous next »