1) the DVD drive is attached to a SATA controller which isn't recognized by the AROS kernel, hence it stops booting
AspireOne does not have a DVD drive, so using an internal SATA drive from a stationary PC, which I connect via SATA to USB connection.
VAIO has internal DVD, can not figure out how to change it to IDE. Little optiones to change anything in the Bios. Only the Boot sequence and some functions that don't lead to anything looking like SATA/IDE settings.
2) the DVD drive is attached to a USB controller which isn't well supported by Poseidon
Only the AspireOne goes thru USB. Don't know anything about if the controller is not well supported.
3) there is a memory card fitted in a drive somehow preventing the system to continue booting
Not that I know of. You mean like a CF card via IDE thing often used on Classic Amiga?
May you be more specific about your most probable configuration? Is the DVD drive internal or external? Is your SATA controller configured to be used like a AHCI/RAID one, or as IDE? The latter configuration is more friendly to AROS but beware of changing it: if you have Windows already installed on another partition of the drive, it may stop booting until you set it to AHCI again.
See answers above. Is there a easy way to make a USB boot disk? Like one can with windows install CD?
Or do you know how to change the DVD drive to IDE on a Sony VAIO?
Shall we continue this "Icaros for Dummies" here, or at another suitable forum, like at support.icarosdesktop.org?
