Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: What can you tell me about my DataFlyer?  (Read 2165 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
What can you tell me about my DataFlyer?
« on: July 10, 2012, 11:25:38 PM »
I pulled this from my dead 2000.

I remember booting from it once, but I don't see a place for the Hard Drive SCSI ribbon to connect to the board. I only see an IDE port. I'm confused, did I loose a part to this or something?
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline desiv

  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 1270
    • Show only replies by desiv
Re: What can you tell me about my DataFlyer?
« Reply #1 on: July 10, 2012, 11:28:42 PM »
If I remember correctly, there were 2 types of dataflyers, IDE and SCSI..

Not sure if it's old 8-bit IDE only or not...

desiv
Logged
Amiga 1200 w/ ACA1230/28 - 4G CF, MAS Player, ext floppy, and 1084S.
Amiga 500 w/ 2M CHIP and 8M FAST RAM, DCTV, AEHD floppy, and 1084S.
Amiga 1000 w/ 4M FAST RAM, DUAL CF hard drives, external floppy.
 

Offline TomJ

  • Jr. Member
  • **
  • Join Date: Dec 2009
  • Posts: 86
    • Show only replies by TomJ
Re: What can you tell me about my DataFlyer?
« Reply #2 on: July 11, 2012, 02:58:02 AM »
They were either IDE or SCSI and I beleive a rare few were capable of both, but am not positve. I have the SCSI Dataflyer 500 without an IDE connector.
Logged
 

Offline orb85750

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show only replies by orb85750
Re: What can you tell me about my DataFlyer?
« Reply #3 on: July 11, 2012, 04:50:45 AM »
Quote from: TomJ;699715
They were either IDE or SCSI and I beleive a rare few were capable of both, but am not positve. I have the SCSI Dataflyer 500 without an IDE connector.

Yes, some had both IDE and SCSI.  I don't have that one, but I do have the separate IDE and SCSI cards.
Logged
 

Offline psxphill

Re: What can you tell me about my DataFlyer?
« Reply #4 on: July 11, 2012, 03:59:45 PM »
Quote from: XDelusion;699688
I pulled this from my dead 2000.
 
I remember booting from it once, but I don't see a place for the Hard Drive SCSI ribbon to connect to the board. I only see an IDE port. I'm confused, did I loose a part to this or something?

It looks like the SCSI connector is not populated, there is a label covering most of the word "SCSI" on the right of your picture.
It's not just a case of adding the connector though, you'd need to put in the SCSI chip as well.
 
From the board marking (5380) it would need one of these http://www.ti.com/lit/ds/symlink/dp5380.pdf
 
The green sticker next to "IDE" and no sticker next to "SCSI" or "SCSI & IDE" is another clue that your card is IDE only.
« Last Edit: July 11, 2012, 04:04:13 PM by psxphill »
Logged
 

Offline TheMagicM

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2857
    • Show only replies by TheMagicM
    • http://www.BartonekDragRacing.com
Re: What can you tell me about my DataFlyer?
« Reply #5 on: July 11, 2012, 04:47:14 PM »
Yea...yours is IDE only.
Logged
PowerMac G5 dual 2.0ghz/128meg Radeon/500gb HD/2GB RAM, MorphOS 3.9 registered, user #1900
Powerbook G4 5,6 1.67ghz/2gb RAM, Radeon 9700/250gb hd, MorphOS 3.9 registered #3143
 

Offline XDelusionTopic starter

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: What can you tell me about my DataFlyer?
« Reply #6 on: July 11, 2012, 08:40:27 PM »
Weird... I swear I recall booting off that puppy before. I'll need to go home and have a second look at the drive that is mounted on it. Maybe it's IDE and my eyes are just playing tricks on me.
Logged
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline motrucker

Re: What can you tell me about my DataFlyer?
« Reply #7 on: July 11, 2012, 09:07:09 PM »
If it's IDE that should be a plus these days - with SCSI drives starting to get a bit scarce (and/or pricey).
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 
Pages: [1]   Go Up
« previous next »