My 500+ Project

[AmmoJammo]

I have a spare scsi case, not sure if its big enough though.

[djos]

I have a spare scsi case, not sure if its big enough though.

Cheers mate but I've already paid for the Yamaha cd-rom case.

[djos]

http://www.ebay.com/itm/PICO-PSU-120SV-Mini-DC-DC-ATX-Power-Supplier-12V-Input-120W-/320942384445?pt=PCA_UPS&hash=item4ab9a8253d

$26 USD with free shipping, then just need to find an old laptop power adapter to match. :-)

Major issue with these Pico PSU's is your power brick needs to produce a car battery like 10-20 amps to run them (they are designed for use in cars).

If were to go down that path, then this is the combo I'd be looking at (PSU Board should fit nicely down the side of the drive case):

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=251058262482&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en#ht_1259wt_886

http://www.ebay.com.au/itm/NEW-12V-10A-Adapter-Power-Supply-LCD-monitor-Cord-/290458208188?pt=LH_DefaultDomain_15&hash=item43a0a887bc#ht_2198wt_1120

[djos]

Ok i'm sold on using a power brick + internal Power supply board (as above), I'll wait till I've got the CD-ROM case and done the other mods first tho as I want to make sure there is enuf space in the case before proceeding (plus i've blown my hobby allowance for the month).

One thing I did buy last night was a cheap hot glue gun, cant believe it was only $3.88 with free shipping from evil bay! :eek:

[djos]

Well I bit the bullet and ordered a 12v 10amp LCD power supply and the mini itx car power supply linked to earlier - cant wait for all my bits to arrive as having the miggy PSU, cf-IDE and cd-rom all in one unit is gonna be a really neat solution and fun to build.

Btw, I have some spare miggy chips and other components for sale over at Amiga bay:

Miggy chips: http://www.amibay.com/showthread.php?t=32879
Ram: http://www.amibay.com/showthread.php?t=30731
2.5" HDD: http://www.amibay.com/showthread.php?t=30735

[Lurch]

Works real well, have one pico and a laptop adapter myself :-) Just have decided on how to mount it yet :-/

[djos]

Neat, are you thinking of using an external CDROM chassis too?

[djos]

Got some more bits today and so did some more work on the miggy. 1st thing I did was replace the 3-pin pc fan connector for the "Gayle" IDE support with a proper 2-pin connector and took the chance to remove all the excess cable:

http://dl.dropbox.com/u/71121999/Amiga/2012-07-31%2019.36.47.jpg

and my ROM Switcher arrived today so I installed that too:

http://dl.dropbox.com/u/71121999/Amiga/2012-07-31%2019.36.20.jpg
http://dl.dropbox.com/u/71121999/Amiga/2012-07-31%2019.36.37.jpg

now im just waiting for my replacement KS v3.1 Rom to arrive.

[djos]

Inspired by another project I've seen recently, I knocked up this Colour ROM Switch sticker:

Hi-Res: http://dl.dropbox.com/u/71121999/Amiga/ROM_Switch_01.png

When printing, I found is about perfect sizing is about 15% of original size.

and my quick and dirty temporary install: http://dl.dropbox.com/u/71121999/Amiga/2012-07-31%2021.12.48.jpg

Enjoy. :cool:

[gertsy]

Inspired by another project I've seen recently, I knocked up this Colour ROM Switch sticker:

Hi-Res: http://dl.dropbox.com/u/71121999/Amiga/ROM_Switch_01.png

and here is a version shrunk to 15% of original (which I found is about perfect sizing):

Small: http://dl.dropbox.com/u/71121999/Amiga/ROM_Switch_01s.png

and my quick and dirty install: http://dl.dropbox.com/u/71121999/Amiga/2012-07-31%2021.12.48.jpg

Enjoy. :cool:

You should have got the nifty and cotton buds out before you stuck that down.  Lots of dust there djos!!!!.

[djos]

Yeah, that was just a test install, next version will be printed in highres on the colour laser at work

[djos]

Got my External CD-ROM yesterday and started work on it by gutting it and removing the Yammy SCSI CD-RW and replacing it with an IDE DVD-ROM Drive (they are shorter than most CD-ROM drives so give me more space to work with):

http://dl.dropbox.com/u/71121999/Amiga/2012-08-03%2011.03.57.jpg

I then used the almost perfectly sized and positioned lower SCSI connector hole to mount my powered CF-IDE Adapter behind to so I can remove my CF Card. Last night I glued the mounts for the CF card in place and then this morning I removed the CF-Adapter and dremel'd the hole ever so slightly wider.

http://dl.dropbox.com/u/71121999/Amiga/2012-08-03%2011.08.56.jpg
http://dl.dropbox.com/u/71121999/Amiga/2012-08-03%2011.04.23.jpg

Now im just waiting for my mini-itx power board, external power brick, my short IDE adapters and Miggy Power lead so I can finish this part of the project off. :cool:

[djos]

Woohoo, the postie just showed up with my replacement KS3.1 Rom!

http://dl.dropbox.com/u/71121999/Amiga/2012-08-03%2012.19.42.jpg

[Azryl]

Gratz! I very nice ongoing build!

Az

[djos]

Gratz! I very nice ongoing build!

Az

Cheers

[som99]

Some great fun read here, progressing quite nice, ill keep reading
Waiting for you to get your Pico-psu and see some more pics

Great work and effort tho, keep it up!