Welcome, Guest. Please login or register.

Author Topic: My A500 "project" pics, details, build log?  (Read 112860 times)

Description:

0 Members and 2 Guests are viewing this topic.

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #329 from previous page: January 10, 2013, 08:24:17 PM »
Lol, get a 1541u2, they do pretty good dual Sid emulation and transform your c64 into a real beast (REU up to 16mb, all save carts, jiffy dos rom support, tap support, g64 support etc)
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #330 on: January 11, 2013, 12:09:02 AM »
Btw, I found a Seller on fleabay with a nice pack of replacement BreadBin c64 Caps and Voltage regulators for $10aud delivered so I grabbed a set. :)

http://www.ebay.com.au/itm/170858848148?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_500wt_1130
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #331 on: January 11, 2013, 10:02:49 AM »
I've recorded the Bolder Dash II music, is there anywhere good to host wave files? about 4 meg each.
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #332 on: January 11, 2013, 10:27:52 AM »
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #333 on: January 11, 2013, 11:51:38 PM »
I put the good chip in the bad motherboard... sounds good...
so, I have two bad SIDs...
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #334 on: January 12, 2013, 02:35:57 AM »
Quote from: AmmoJammo;722146

so, I have two bad SIDs...


That sucks, you can usually pickup replacements on ebay tho.
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #335 on: January 12, 2013, 02:55:05 AM »
Btw, ive been given the below contact in France who supplies a500 Capacitor replacement kits. :)

http://leblogdecosmos.blogspot.fr/p/a-vendre.html

I've send him an email requesting 2 kits for my a500's.
« Last Edit: January 12, 2013, 05:20:40 AM by djos »
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline Azryl

  • Sr. Member
  • ****
  • Join Date: Jul 2004
  • Posts: 395
    • Show only replies by Azryl
    • http://www.azryl.com
Re: My A500 "project" pics, details, build log?
« Reply #336 on: January 12, 2013, 04:56:53 AM »
Early SID chips need 9vac to work properly on the C64 Breadbin model. Check your voltages and amperes.

Az
Completely useless? I can always be used as a bad example  :lol:
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #337 on: January 12, 2013, 06:05:56 AM »
they are all early SID chips, and I've been using the same power supply for all testing.

I have four chips total, two seems to work, two are crackly..

On another, related note, I made an XA1541 cable today, using 2N7000 mosfets from Jaycar, 60 cents each, needed four, plus a 25 pin male DB connector, already had a backshell, and I cut a spare floppy cable in half.

Well, it refused to work in Windows 7, so I pulled out an old Windows XP machine again ;)







SO! any good games I should get? or even music demos? something to test the SID chips fully?
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #338 on: January 12, 2013, 06:18:23 AM »
Here's SIDBench :)

http://dl.dropbox.com/u/71121999/c64/sidbench1.d64

This page might be useful during your testing:
http://ploguechipsounds.blogspot.com.au/2010/05/one-page-basic-sid-benchmark.html

as for games, check usenet for the Blast Collection (almost 2,000 games in that collection). :D
« Last Edit: January 12, 2013, 06:26:43 AM by djos »
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #339 on: January 12, 2013, 06:59:27 AM »
Are there any demos like on the Amiga?
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #340 on: January 12, 2013, 07:02:59 AM »
Thousands!!
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #341 on: January 12, 2013, 07:38:50 AM »
Quote from: djos;722180
Here's SIDBench :)

http://dl.dropbox.com/u/71121999/c64/sidbench1.d64

This page might be useful during your testing:
[url]http://ploguechipsounds.blogspot.com.au/2010/05/one-page-basic-sid-benchmark.html[/url



Thanks, at least theres a sound file on there so i know what Im listening for ;)
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #342 on: January 12, 2013, 08:31:50 AM »
Yeah it does help to know what you are listening too.

I found the CBM6581 sounds most like mine (aside from the slight pitch difference) and I use a set of monitor headphones to do the comparison as they remove a lot of external noise.
« Last Edit: January 12, 2013, 09:21:25 AM by djos »
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem
 

Offline AmmoJammoTopic starter

  • Hero Member
  • *****
  • Join Date: May 2012
  • Posts: 726
    • Show only replies by AmmoJammo
Re: My A500 "project" pics, details, build log?
« Reply #343 on: January 13, 2013, 05:23:38 AM »
Quote from: djos;722050
Btw, I found a Seller on fleabay with a nice pack of replacement BreadBin c64 Caps and Voltage regulators for $10aud delivered so I grabbed a set. :)

http://www.ebay.com.au/itm/170858848148?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_500wt_1130

Dont forget the 4700uF, 16volt capacitor, and 5volt regulator in the power supply itself.

Unless you have a power supply that you can't open...
« Last Edit: January 13, 2013, 05:27:59 AM by AmmoJammo »
 

Offline djos

  • Hero Member
  • *****
  • Join Date: Jun 2012
  • Posts: 982
    • Show only replies by djos
    • http://users.adam.com.au/djorlc/
Re: My A500 "project" pics, details, build log?
« Reply #344 on: January 13, 2013, 05:56:10 AM »
Quote from: AmmoJammo;722266
Dont forget the 4700uF, 16volt capacitor, and 5volt regulator in the power supply itself.

Unless you have a power supply that you can't open...
How hard is it to take the PSU apart and replace those parts?
[SIGPIC][/SIGPIC] Amiga 1200 w/ ACA1220 16Mhz 128MB w/ RTC, 4GB CF-HDD, Roland MT-32 MIDI Synthesiser
Amiga 500 w/ KS2.05, 1Mb Chip-Ram, CF-IDE w/4MB Fast-Ram, FDD Boot Selector, HxC RevC Floppy emulator
Commodore 64 w/ 1541 Ultimate-II inc Tape Adapter, JiffyDOS, 1541 Disk Drive, 1531 Datasette, Flyer Net Modem