Trouble with LCD monitor and Amiga 3000

[WeiXing3D]

I can't get my VGA LCD monitor (Acer L1716) to work with an A3000. Any tips to make it work will be appreciated.

I hooked up my small Shinco HD TV with VGA connection and it works but the apps bar colors are fuzzy.

[Ral-Clan]

I can't get my VGA LCD monitor (Acer L1716) to work with an A3000. Any tips to make it work will be appreciated.

I hooked up my small Shinco HD TV with VGA connection and it works but the apps bar colors are fuzzy.

This is a duplicate thread.  You've already posted this question in another thread.

But to duplicate my answer, have you flipped the switch to enable the scan-doubler/flicker-fixer on the back of the A3000?

[WeiXing3D]

I did, but that didn't fix my problem.

It is working now with an old 1084S. I can't still get the LCD to work.
 

This is a duplicate thread.  You've already posted this question in another thread.

But to duplicate my answer, have you flipped the switch to enable the scan-doubler/flicker-fixer on the back of the A3000?

[magnetic]

Are you sure the ouput of the vga on the a3k is good? Does it work with another monitor?

[desantii]

He dis say it works with a vga in a tv so must be the lcd

[WeiXing3D]

Yes, I am using an Amiga 1084S monitor, connected with a VGA 15-pin cable.

Are you sure the ouput of the vga on the a3k is good? Does it work with another monitor?

[jsixis]

some monitors will not work as the Amiga refresh rate is too low, sucks but I've had the same problem even with my picasso II