Welcome, Guest. Please login or register.

Author Topic: Easynet and wireless problems  (Read 1472 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline espenboTopic starter

  • Jr. Member
  • **
  • Join Date: Jun 2009
  • Posts: 70
    • Show only replies by espenbo
Easynet and wireless problems
« on: May 31, 2012, 05:51:09 PM »
Hello.

Is easynet incompatible with AExplorer? I can't get it to work.
I have a other OS drive that use miami to connect and there it works. I use the same IP adress on the amiga.

I can't get my wireless card to work rigth. with no password I can connect but it really slow.
I have tride to set the wireless station rigth next to the amiga.

Wifisignal 1.4.2 from aminet
Signal level -73dB
Noise Level -91 dB
Signal to noise 18 dB

Signal Quality Poor


....Well it I had a slow ping last night but nothing today..... :(

With WEP password I can't connect...
Same result with
Wifisignal 1.4.2 from aminet
Signal level -73dB
Noise Level -91 dB
Signal to noise 18 dB

Signal Quality Poor


Yes and Easynet works grate and fast if I use a pcmcia cabel card insted.
NETPCM003

Sombody that have som good advise

Espen
 

Offline outlawal2

Re: Easynet and wireless problems
« Reply #1 on: May 31, 2012, 08:57:23 PM »
Try moving the Amiga away from the wireless router...  Try 6 feet or more if possible..  Also make sure that the router is not within 3 feet of a computer monitor.  I have seen monitors cause a lot of interference issues and I have had issues with receivers being too close as well...

May not solve your problem but worth a try..
 

Offline espenboTopic starter

  • Jr. Member
  • **
  • Join Date: Jun 2009
  • Posts: 70
    • Show only replies by espenbo
Re: Easynet and wireless problems
« Reply #2 on: June 01, 2012, 06:54:09 PM »
Hello

It did not help:(

Espen
 

Offline espenboTopic starter

  • Jr. Member
  • **
  • Join Date: Jun 2009
  • Posts: 70
    • Show only replies by espenbo
Re: Easynet and wireless problems
« Reply #3 on: June 02, 2012, 08:49:46 PM »
I can't get FACTS to work with easynet :( No TCP/IP stack. But AWeb works...
Do Easynet use a bad tcp/ip stack?
Yes, thise is with cabel net. Wireless still don't work :(

Espen