Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Indivision AGA MK2 pics  (Read 2822 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline PiruTopic starter

  • \' union select name,pwd--
  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 6946
    • Show only replies by Piru
    • http://www.iki.fi/sintonen/
Indivision AGA MK2 pics
« on: May 30, 2012, 11:54:54 PM »
I received my Indivision AGA MK2 today and installed it. Unsurprisingly the picture quality is much better than with the older Micronik Scandy 1200.

There is some slight vertical banding, but that's likely due to the mobo (I had it but only much worse with the scandy as well).

My 20" LG 4:3 TFTs handle the VGA signal okay, but DVI doesn't quite work right yet. The LG TV doesn't cope with the signal, but later on I can tune the settings when the software gets updated. I have SCART for the TV anyway, so it's no biggie.

Pictures
Logged
 

Offline fitzsteve

Re: Indivision AGA MK2 pics
« Reply #1 on: May 31, 2012, 12:05:08 AM »
Lookin' good and a Blizzard PPC in there too :cool:

Don't forget to try Superplus and HighGFX modes (800x600 & 1024x768) makes for a nice Workbench.
Logged
 

Offline Virge

  • Newbie
  • *
  • Join Date: Mar 2002
  • Posts: 29
    • Show only replies by Virge
Re: Indivision AGA MK2 pics
« Reply #2 on: May 31, 2012, 01:31:28 AM »
Good Quality!
Logged
-Amiga 1200 / BlizzardPPC 060 50mhz - Powerpc 233mhz / Mediator TX / Soundblaster 128 / Ethernet / Voodoo Banshee 16mb / 256mb Ram / FastAta / 80gb ide 3.5\\" / Dvdrw Asus / Os3.9/Os4.0
-Amiga 1200 / 10gb ide 2.5\\" / Workbench 3.1
-Amiga 600HD / 2mb ...
 

Offline Rob

Re: Indivision AGA MK2 pics
« Reply #3 on: May 31, 2012, 02:27:44 AM »
Quote from: Piru;694738

There is some slight vertical banding, but that's likely due to the mobo (I had it but only much worse with the scandy as well).


Sounds like the mobo since I've never had this with my DCE scan doubler or the original Indivision AGA.

I did read somewhere that flicker fixed interlace modes suffer banding but on the horizontal plane.
Logged
 

Offline NovaCoder

Re: Indivision AGA MK2 pics
« Reply #4 on: May 31, 2012, 02:56:53 AM »
Glad you're still using with your Classics Piru :)
Logged
Life begins at 100 MIPS!


Nice Ports on AmiNet!
 

Offline nyteschayde

  • VIP / Donor - Lifetime Member
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 643
    • Show only replies by nyteschayde
    • http://www.nyteshade.com
Re: Indivision AGA MK2 pics
« Reply #5 on: May 31, 2012, 06:05:50 AM »
Do you do anything to prevent overheating with the BlizPPC in the desktop case? I have a Blizzard PPC in my tower but always thought it might be nice in the stock casing.

Quote from: Piru;694738
I received my Indivision AGA MK2 today and installed it. Unsurprisingly the picture quality is much better than with the older Micronik Scandy 1200.

There is some slight vertical banding, but that's likely due to the mobo (I had it but only much worse with the scandy as well).

My 20" LG 4:3 TFTs handle the VGA signal okay, but DVI doesn't quite work right yet. The LG TV doesn't cope with the signal, but later on I can tune the settings when the software gets updated. I have SCART for the TV anyway, so it's no biggie.

Pictures
Logged
Senior MTS Software Engineer with PayPal
Amigas: A1200T 060/603e PPC • A1200T 060 • A4000D 040 • A3000 (x2) • A2000 Vamp/V2 • A1200 (x4) • A1000 (x3) • A600 Vamp/V1 • A500
 

Offline bbond007

  • Hero Member
  • *****
  • Join Date: Mar 2009
  • Posts: 1517
    • Show only replies by bbond007
Re: Indivision AGA MK2 pics
« Reply #6 on: May 31, 2012, 06:11:46 AM »
Quote from: Piru;694738
I received my Indivision AGA MK2 today and installed it. Unsurprisingly the picture quality is much better than with the older Micronik Scandy 1200.

There is some slight vertical banding, but that's likely due to the mobo (I had it but only much worse with the scandy as well).

My 20" LG 4:3 TFTs handle the VGA signal okay, but DVI doesn't quite work right yet. The LG TV doesn't cope with the signal, but later on I can tune the settings when the software gets updated. I have SCART for the TV anyway, so it's no biggie.

Pictures


I believe Jens has stated that the banding has something to do with the pixel clock rate mismatch and will be addressed with the future firmware upgrade.

On one monitor I have tried 1024x768 looks absolutely perfect with no banding, however in NTSC and PAL low-rez mode it has really bad banding. On another monitor its the exact opposite...
Logged
 

Offline PiruTopic starter

  • \' union select name,pwd--
  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 6946
    • Show only replies by Piru
    • http://www.iki.fi/sintonen/
Re: Indivision AGA MK2 pics
« Reply #7 on: May 31, 2012, 07:02:22 AM »
Quote from: nyteschayde;694755
Do you do anything to prevent overheating with the BlizPPC in the desktop case? I have a Blizzard PPC in my tower but always thought it might be nice in the stock casing.
I have one of these: Antec Notebook Cooler
The A1200 sits on top in a way that the BPPC gets cooled by one of the fans inside. Since it's USB powered I have a powered USB hub just to power the thing. Starting at 14€ this is probably one of the cheapest cooling solutions out there...
Logged
 

Offline LoadWB

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 2901
  • Country: 00
    • Show only replies by LoadWB
Re: Indivision AGA MK2 pics
« Reply #8 on: May 31, 2012, 08:43:07 AM »
Quote from: Piru;694759
I have one of these: Antec Notebook Cooler
The A1200 sits on top in a way that the BPPC gets cooled by one of the fans inside. Since it's USB powered I have a powered USB hub just to power the thing. Starting at 14€ this is probably one of the cheapest cooling solutions out there...


Holy shyt, that's just genius.  I've been spending time trying to re-invent the wheel!  (no slap forehead anim)

Those pics look friggen awesome.  Now I really want one of those.  Might need to whore myself out for a couple more dispatch jobs soon.
Logged
 

Offline runequester

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: Indivision AGA MK2 pics
« Reply #9 on: May 31, 2012, 08:46:28 AM »
The vertical banding seems to be almost impossible to escape. It doesn't look bad at all in the picture though
Logged
 
Pages: [1]   Go Up
« previous next »