Indivision ecs Picasso96 screen shot!

[NovaCoder]

BOOM loaded @ 320x200 video rtg, cpu 030 and stack 40960 double screen!!! (side by side) Played frame by frame! more to come gonna see what other resolutions are better and works.
oh and heres the VIDEO!

http://www.youtube.com/watch?v=m1XV2XtToCc&context=C4f6ad9aADvjVQa1PpcFNrSnbKLWOD8S3fAFtPOfjc0_N21WWo0T4=

lost

Awesome

[AmiDude]

It's very buggy... It doesn't work for me.

[polyp2000]

Two questions ...

A long shot i know - but just wondering if anyone has tried this with the indi AGA ?

Does Jens know about this driver and would he plan on incorporating it into the official ones?

[NovaCoder]

STATUS: BETA / ALPHA you should know what you are doing! Requirements: installed Amiga (ECS), a minimum of 4MB Fast RAM with MMU and a Indivision ECS (Core 1.1) 1.1

Installation: - Install MMULib Picasso96 + (libs Version: picasso96.library min version 2.3!) - Replace incompatible with the MMU program MMULib equivalents . - Copy all files of the install archive to the equivalent directories

FAQ:
Q: I can not boot anymore. I can only start via the boot menu and choosing "no startup-sequence" A: Press both mouse buttons, the Picasso system is not activating in such a situation!
Q: How to uninstall? A: The Indivision driver can be deleted in the devs: monitors directory. After that only the Picasso96 system and the libraries mmu stay inside. Picasso96 is activated on starting a driver in the devs: monitors directory (for example uaegfx, domino ..). Delete all "NEW" drivers installed by Picasso96. And please do not touch your PAL, NTSC drivers.
Q: I do not have a indivisionECS installed, but something happens. A: There is not HARDWARE detection inside. Your should know what you are doing.
Q: Did you support the AGA MK # 2? A: Nobody knows right now, if it is possible. We must wait for it.
Q: Is it possible to play games on a AGA ECS / OCS Amiga? A: No its not possible. Maybe you can "play" a RTG game. But it is maybe a little bit slow!
Q: Why should I backup my system? A: Do not blame me if something goes wrong. I can only test on one amiga with one config! And there is everything ok.
Q: ACATune my accelerator did not find any more?
A: That's because of the MMU Library.

Hope that helps (taken from a1k.org)

[Piru]

just wondering if anyone has tried this with the indi AGA ?

It doesn't work as Indivision AGA works in a completely different way to indivision ECS.

[lost_loven]

system loops when load modules for the scsi.device in startup-sequence, just keeps rebooting to a black screen. Bugs loven em!

lost
@NovaCoder - didn't work for me.

Hiya Symplex,
 
New RTG version OF BOOMS that only renders screen update (flickers), lake if you CAN GET it running  

BOOM_RTG.lha

[AmiDude]

STATUS: BETA / ALPHA you should know what you are doing! Requirements: installed Amiga (ECS), a minimum of 4MB Fast RAM with MMU and a Indivision ECS (Core 1.1) 1.1

Installation: - Install MMULib Picasso96 + (libs Version: picasso96.library min version 2.3!) - Replace incompatible with the MMU program MMULib equivalents . - Copy all files of the install archive to the equivalent directories

Hope that helps (taken from a1k.org)

I have all the above correctly installed. Still no go...

It does show up in the ScreenMode prefs as:
indi:320x240 - 58Hz, 38,28Khz
indi:640:480 - 87Hz, 38,28Khz
indi:800x600 - 87Hz, 38,28Khz
indi:1024x768 - 91Hz, 38,40Khz
IndivisionECS:800x600 - 0Hz, 0,00Khz

When I use the indi modes, the screen goes black and stays black. So I have to reboot the machine. When I use IndivisionECS:800x600 mode, the screen goes a few seconds black and then comes back, but it is just the "normal" PAL mode.

It also shows up in the P-96-prefs program, but the INDI screenmodes are not modifiable.

[chfriend]

I'm having the exact same problem as Amidude when I tried loading it onto my 2000 except if I hit test in P96Prefs, it works for the test screen.

[lost_loven]

looks like to me your your monitor can't sync that high.  I am not near my miggy right now (will look later) but its around 58ish/32ish for 800x600. try copying 2.0, the copy 2.e then copy 2.s over in that order. don't touch the p96 prefs at all. that happened to me and thats what i did and fixed it. hope that helps.

edit: also in monitors for the mouse in the info - softwaresprites=Yes if you have no mouse after the screen switching.
also i added this in my startup-sequence  - libs: picasso96/indi.card

lost

[lost_loven]

version "v" and "w" did not work for me.

lost

[magnetic]

wow A600 running RTG never thought I see the day! Classic Amiga miracles happen every year!

[NovaCoder]

Check this -> mfilos video

[lost_loven]

saw that .. sweet! ... funny how a straight install of wb3.1 on 2 different machines can give different boot up's. I have to post mine with errors and without. With version w i think i saw something with fpga in the startup as it boots.. know wat thats about?

lost

[chfriend]

ARGH! Why won't this work for me!  Whenever I try going into 800x600 my monitor wigs out and says the vertical refresh is 6553.5hz - 640x480 doesn't give an out of sync error but the screen goes black and the "test" option works for both.

HELP ME KOBI WAN ENOBI!

[magnetic]

I dunno but with all the bounties out there in the amiga community. You would think there would be  a bounty for this driver so that this dev could get help from another dev. RTG with INdivision for ecs machines would be a big boon to classics

[lost_loven]

looking at 1024x768 and it shows 91hz 38.40hz  which won't work on my flat screen. any work around this? 58hz x 38.28 works and thats 800x600.  be nice to have a bigger 256 color workbench! ..

@chrfriend .. did you update the core and install everything? i did it in the order listed.
 - Install MMULib + Picasso96 (Version libs:picasso96.library min Version 2.3!)
- Replace incompatible MMU programms with the MMULib equivalents.
- Copy all files of the install archive to the equivalent directorys

lost