Mouse pointer glitch after 3.1

[dougal]

I installed a 3.1 rom on my A2000 which worked fine in an A500 and an A600.

Now the mouse pointer is all glitchy. I tried booting from the original wb floppies aswel but same.

Pic attached

[dougal]

Weird!! I replaced the OCS Agnus to a spare ECS one i have and now the pointer is good but the Amiga is in NTSC :S

Dammit!! What is wrong here

[BinoX]

Did u accidently use an NTSC Agnus? (Part number: 318070-01) (or possibly part number: 318069-17)

[dougal]

318069-2

[dougal]

The A2000's original agnus seems to have buggered up and no longer works. I am stuck with this NTSC one now.

I can boot into PAL by selecting it from early startup but is there an easier more permanent way?

[psxphill]

I can boot into PAL by selecting it from early startup but is there an easier more permanent way?

You probably need to change J102
 
http://www.flickr.com/photos/blakespot/5586840948/
 
more info at the bottom of this page.
 
http://www.amiga-hardware.com/showhardware.cgi?HARDID=17

[dougal]

You probably need to change J102
 
http://www.flickr.com/photos/blakespot/5586840948/
 
more info at the bottom of this page.
 
http://www.amiga-hardware.com/showhardware.cgi?HARDID=17

Yes i read about that. My J102 is currently shorted / joined. Should i get a knife and cut the solder ?

[dougal]

Done, fixed.. have PAL and 1MB Chip