RTL8029as not working OS4.1 Classic

[lumby]

Hi All

I was happy to find a copy of OS4.1 Classic under the christmastree

But I Can not get my RTL8029as to work whit the rtl8029.device
It say Can not open port 0
The card i from Amigakit and it was descriped to be OS4.1 compatibel.

My setup is a A4000 whit a Mediator.
All jumpers is closed at descriped In the FAQ on the OS4.1 cd
The second card is a Radin 9250 256mb from Elbox

I have no other card indtalled at this time!

Hope some of you Can help me!
Merry Christmas to you all

[HammerD]

Hi All

I was happy to find a copy of OS4.1 Classic under the christmastree

But I Can not get my RTL8029as to work whit the rtl8029.device
It say Can not open port 0
The card i from Amigakit and it was descriped to be OS4.1 compatibel.

My setup is a A4000 whit a Mediator.
All jumpers is closed at descriped In the FAQ on the OS4.1 cd
The second card is a Radin 9250 256mb from Elbox

I have no other card indtalled at this time!

Hope some of you Can help me!
Merry Christmas to you all

Merry Christmas Is the card showing up in Ranger?  It should be listed under PCI devices.  First place to check.  Try another PCI slot also...and does the card work under OS 3.9?

[lumby]

Hi

Yes the card are in the Ranger PCI device list.
I have tryed to move the card to other PCI slot.
And yes it works under OS3.9

Best regards ;-)

[HammerD]

Hi

Yes the card are in the Ranger PCI device list.
I have tryed to move the card to other PCI slot.
And yes it works under OS3.9

Best regards ;-)

Ok, you did use the internet connection wizard? It should automatically identify the card and setup the proper entries in devs:netinterfaces.

[lumby]

Yes I used the internet connection wizard.
But it says nothing found!
The I have tryed the manuel way.
Selected rtl8029.device and then the test bottom.