Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Compserv Scandoubler slightly distorted when cold  (Read 1619 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Blendor_POLANDTopic starter

  • Newbie
  • *
  • Join Date: Aug 2011
  • Posts: 48
    • Show only replies by Blendor_POLAND
Compserv Scandoubler slightly distorted when cold
« on: October 20, 2011, 06:46:31 PM »
when it is cold for about 30 seconds the image is slightly distorted after a short time is already good, I have a question faulty scan doubler? or not?

30 seconds after, the picture is excellent and you can use all day without any problems
« Last Edit: October 20, 2011, 06:48:33 PM by Blendor_POLAND »
Logged
 

Offline 560SL

  • Full Member
  • ***
  • Join Date: Jan 2005
  • Posts: 197
    • Show only replies by 560SL
Re: Compserv Scandoubler slightly distorted when cold
« Reply #1 on: October 20, 2011, 07:23:22 PM »
I have the same problem with my CybervisionPPC- gfx card, I'm suspecting bad capacitors.

Is it the Comp Serv II card you have? I have one of those, and its not working properly in my A4000T, though its working perfectly in an A4000D.
Logged
AmigaOS: Forward Into The Past
 

Offline Blendor_POLANDTopic starter

  • Newbie
  • *
  • Join Date: Aug 2011
  • Posts: 48
    • Show only replies by Blendor_POLAND
Re: Compserv Scandoubler slightly distorted when cold
« Reply #2 on: October 20, 2011, 07:25:24 PM »
compserv version 1.1
Logged
 

Offline mongo

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 964
    • Show only replies by mongo
Re: Compserv Scandoubler slightly distorted when cold
« Reply #3 on: October 20, 2011, 07:48:31 PM »
Quote from: Blendor_POLAND;664242
when it is cold for about 30 seconds the image is slightly distorted after a short time is already good, I have a question faulty scan doubler? or not?

30 seconds after, the picture is excellent and you can use all day without any problems


Problems like this are usually caused by a bad connection somewhere. When things heat up they expand making the connection better.

You can try to find and fix the connection, but I don't know if I'd bother unless it gets worse. 30 seconds isn't that long to wait.
Logged
 

Offline Blendor_POLANDTopic starter

  • Newbie
  • *
  • Join Date: Aug 2011
  • Posts: 48
    • Show only replies by Blendor_POLAND
Re: Compserv Scandoubler slightly distorted when cold
« Reply #4 on: October 20, 2011, 08:09:24 PM »
Connector is not a problem, but for me it's not a problem a while wait few seconds for the image stabilization, I ask for curiosity, I read the instructions from external Elbox Scandoubler and the manufacturer recommends you wait for 5 minutes to complete correctness of these types of device that can have:) hehe
Logged
 

Offline 560SL

  • Full Member
  • ***
  • Join Date: Jan 2005
  • Posts: 197
    • Show only replies by 560SL
Re: Compserv Scandoubler slightly distorted when cold
« Reply #5 on: October 20, 2011, 08:45:27 PM »
Yes, the external scandoublers definetly needs a bit of warming up before they produce a stable image. For the Comp Serv though, I'd just leave it the way it is too.
Logged
AmigaOS: Forward Into The Past
 

Offline zipper

Re: Compserv Scandoubler slightly distorted when cold
« Reply #6 on: October 20, 2011, 09:14:56 PM »
I'd say cheap components and simple circuits are prone to changing values and so the trim crawls - just like my external EZ-VGA sd/FliFi.
Logged
 

Offline Blendor_POLANDTopic starter

  • Newbie
  • *
  • Join Date: Aug 2011
  • Posts: 48
    • Show only replies by Blendor_POLAND
Re: Compserv Scandoubler slightly distorted when cold
« Reply #7 on: October 20, 2011, 09:31:53 PM »
ok this is not big problem for me , SC work super , this problem is very very lightly
Logged
 

Offline Blendor_POLANDTopic starter

  • Newbie
  • *
  • Join Date: Aug 2011
  • Posts: 48
    • Show only replies by Blendor_POLAND
Re: Compserv Scandoubler slightly distorted when cold
« Reply #8 on: October 28, 2011, 02:55:45 PM »
problem solved, a new power supply atx weak corsair cx430 is too weak for amiga 4000 cybervision64 + scandoubler compserv !!! !!!, I put the old power supply atx 145watt ACBEL IBM and scandoubler works ok

AMAZING:)
Logged
 
Pages: [1]   Go Up
« previous next »