Welcome, Guest. Please login or register.

Author Topic: Dennis Ritchie passes away :'(  (Read 4725 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Dwyloc

  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 208
    • Show only replies by Dwyloc
Re: Dennis Ritchie passes away :'(
« Reply #14 from previous page: October 13, 2011, 09:31:45 PM »
Quote from: bloodline;663441
Not sure... Probably would have dragged MacOS classic into the 21st century, and I would have little to do with them...


As a large amount of MacOS classic will have been written in C as well with out Dennis Ritchie MacOS classic may also have failed to come to pass :-)
Sam440ep 667mhz 512megs OS4.1
Minimig, 4MB RAM, ARM add-on board
Amiga 1200 Eyetech mk4 Tower, Blizzard 1240 040/40 32MB Fast ram, IDEFix Express mk2, mediatorSX pci, Voodoo3 PCI, PCI network card, OS3.9 BB2.
 

Offline nicholasTopic starter

Re: Dennis Ritchie passes away :'(
« Reply #15 on: October 13, 2011, 09:32:32 PM »
Quote from: bloodline;663441
Not sure... Probably would have dragged MacOS classic into the 21st century, and I would have little to do with them...

If my memory serves, TripOS (the basis for AmigaDOS) was a Unix inspired system if not a direct clone... So no UNIX, no Amiga :-/


TRIPOS was originally developed for the PDP-11, but that's about the only thing it has in common with UNIX.
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline commodorejohn

  • Hero Member
  • *****
  • Join Date: Mar 2010
  • Posts: 3165
    • Show only replies by commodorejohn
    • http://www.commodorejohn.com
Re: Dennis Ritchie passes away :'(
« Reply #16 on: October 13, 2011, 09:49:10 PM »
Quote from: Dwyloc;663455
As a large amount of MacOS classic will have been written in C as well with out Dennis Ritchie MacOS classic may also have failed to come to pass :-)
Actually, it was originally written in assembler and Pascal, I don't think they went C until System 7 or 7.5.
Computers: Amiga 1200, DEC VAXStation 4000/60, DEC MicroPDP-11/73
Synthesizers: Roland JX-10/MT-32/D-10, Oberheim Matrix-6, Yamaha DX7/FB-01, Korg MS-20 Mini, Ensoniq Mirage/SQ-80, Sequential Circuits Prophet-600, Hohner String Performer

"\'Legacy code\' often differs from its suggested alternative by actually working and scaling." - Bjarne Stroustrup
 

Offline Dwyloc

  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 208
    • Show only replies by Dwyloc
Re: Dennis Ritchie passes away :'(
« Reply #17 on: October 13, 2011, 09:58:55 PM »
Quote from: commodorejohn;663461
Actually, it was originally written in assembler and Pascal, I don't think they went C until System 7 or 7.5.

lol, but did they use emacs or vi to write the code as both were written in C if I remember correctly :)
Sam440ep 667mhz 512megs OS4.1
Minimig, 4MB RAM, ARM add-on board
Amiga 1200 Eyetech mk4 Tower, Blizzard 1240 040/40 32MB Fast ram, IDEFix Express mk2, mediatorSX pci, Voodoo3 PCI, PCI network card, OS3.9 BB2.
 

Offline nicholasTopic starter

Re: Dennis Ritchie passes away :'(
« Reply #18 on: October 13, 2011, 10:04:31 PM »
Quote from: commodorejohn;663461
Actually, it was originally written in assembler and Pascal, I don't think they went C until System 7 or 7.5.


Oh I have sweet memories of writing everything in Turbo Pascal then re-writing it again in TASM syntax assembly to teach myself the latter. :)
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline commodorejohn

  • Hero Member
  • *****
  • Join Date: Mar 2010
  • Posts: 3165
    • Show only replies by commodorejohn
    • http://www.commodorejohn.com
Re: Dennis Ritchie passes away :'(
« Reply #19 on: October 13, 2011, 11:23:32 PM »
Quote from: Dwyloc;663462
lol, but did they use emacs or vi to write the code as both were written in C if I remember correctly :)
According to Andy Hertzfeld's account they used Lisas for development work, and IIRC the Lisa software was also all Pascal or assembler, so it's possible C didn't enter the equation (on the OS-dev side of things) until much later.
Computers: Amiga 1200, DEC VAXStation 4000/60, DEC MicroPDP-11/73
Synthesizers: Roland JX-10/MT-32/D-10, Oberheim Matrix-6, Yamaha DX7/FB-01, Korg MS-20 Mini, Ensoniq Mirage/SQ-80, Sequential Circuits Prophet-600, Hohner String Performer

"\'Legacy code\' often differs from its suggested alternative by actually working and scaling." - Bjarne Stroustrup
 

Offline esc

Re: Dennis Ritchie passes away :'(
« Reply #20 on: October 14, 2011, 12:04:10 AM »
The Kernighan/Ritchie is still what I consider my personal holy book of coding :)  Without it, I'd have never figured my way around in C...
 

Offline slayer

  • Full Member
  • ***
  • Join Date: May 2009
  • Posts: 188
    • Show only replies by slayer
Re: Dennis Ritchie passes away :'(
« Reply #21 on: October 14, 2011, 09:57:56 AM »
I just checked and I have this very book also Revision2 this is great because I'm going to start the road to programming again early November

very cool :-)
~Yes I am a Kiwi, No, I did not appear as an extra in \'Lord of the Rings\'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
 

Offline slayer

  • Full Member
  • ***
  • Join Date: May 2009
  • Posts: 188
    • Show only replies by slayer
Re: Dennis Ritchie passes away :'(
« Reply #22 on: October 14, 2011, 10:02:41 AM »
I just checked and I have this very book also Rev2 this is great because I'm going to start the road to programming again early November

When I first began this journey I was working out of "beginning with C" by Ron House which is supposed to be C++ compatiable

I have all or most of the abacus programming books but I'm not sure I want to learn C using Amiga C for beginners etc...

anyway, sorry to stray, this is a day to remember!
~Yes I am a Kiwi, No, I did not appear as an extra in \'Lord of the Rings\'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
 

Offline Karlos

  • Sockologist
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 16879
  • Country: gb
  • Thanked: 5 times
    • Show only replies by Karlos
Re: Dennis Ritchie passes away :'(
« Reply #23 on: October 14, 2011, 07:44:49 PM »
/* RIP Dennis :( */
int p; // A
 

Offline gertsy

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 2318
  • Country: au
  • Thanked: 1 times
    • Show only replies by gertsy
    • http://www.members.optusnet.com.au/~gbakker64/
Re: Dennis Ritchie passes away :'(
« Reply #24 on: October 15, 2011, 07:04:22 PM »
RIP

There's a part of me that wishes he made it to 2016.

RIP dmr.