Apollo 1230 Turbo Lite (LC) jumper settings?

[carvedeye]

Hi all im trying to set my Apollo 1230 Turbo Lite (LC) to 4mb as it conflicts with the PCMCIA.
Im tryting to setup a network with genesis and really need to set it to 4mb so i can get setup so would love it if someone can tell me what the jumper settings are for it.

[desiv]

Note sure, but looking at what I can see online, it looks like it's possible you will need to replace the 8M SIMM with a 4M SIMM and change that 2nd jumper???

desiv

[zipper]

Jumper | Open .  |Closed
RAM ....    |No RAM| RAM Installed
4/8  .....    |4MB  ....   | 8MB Installed
re TBBOAH

[LaserBack]

Hi all im trying to set my Apollo 1230 Turbo Lite (LC) to 4mb as it conflicts with the PCMCIA.
Im tryting to setup a network with genesis and really need to set it to 4mb so i can get setup so would love it if someone can tell me what the jumper settings are for it.

you will not have PCMCIA conflicts with 8mb ram if you have kickstart 3.0
but if you have kickstart 3.1 nothing will works fine...in fact PCMCIA will stop working if you have 8mb
Those conflicts that some ppl still think that existed.. is a myth....were only with the old PCMCIA ram cards that existed in 199x and today nobody use
you can setup your apollo with 8mb and you will not have any conflicts with PCMCIA modems,ethernet cards or any other new PCMCIA device